Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Trailer tire pressure


Deep_Sinker

Question

Does anyone know for sure what smaller trailer tires should run for pressure. I picked up some Carlise 4.80 x 12 rim and tire for my boat trailer this weekend and there was a sticker saying to inflate to 60lbs. cold.(this is what the side wall says is the max pressure) Am I crazy thinking that this is way too high? Any good advice is appreciated. It seems I can only get a few thousand miles out of these tires before they are shot.

Link to comment
Share on other sites

13 answers to this question

Recommended Posts

  • 0

Oh, that's why my trailer tires always very hot even after a short trip. I thought my truck's tire needs only 33 lbs, why my trailer tires said 50 lbs, LOL.

Link to comment
Share on other sites

  • 0

A more complex answer just to throw a wrench in the machinery...

Every tire has a pressure vs load capacity. Now, for some it's very hard, if not darn near impossible to find this data, but that is where the most correct inflation pressure comes from.

Too much air and the the ride is overly rough and can be damaged by shocks/impacts, too low and the tire runs hot, harder to pull, etc.

Here is an example from Goodyear. You find the tire style, size, load rating and then you get the tire load vs. pressure details. So, if you know the weight of the trailer and load, you can then determine the "optimum" inflation pressure - again, provided you can locate the load table.

Link to comment
Share on other sites

  • 0

Another point I see often ignored with trailer tires is the maximum speed rating. I see many trailers with 8 or 10 in. tires being towed down the interstate at 75-80 mph. These tires are probably rated for 55 mph max. Some of the 8" are only rated for 45 mph. Part of this is because of bearing speed. That small trailer tire is turning more than 4 to 1 compared to your trucks tire. Lots of extra rpm there. If that tire is soft (low air), all the extra sidewall deformation will really generate heat too.

Link to comment
Share on other sites

  • 0

Are Carlisle tires really as bad as I am hearing and reading on different forums? I have a set on my Eagle trailer now that are 3 yrs old but look to be in good condition with about 4500 miles on them. Is it true that a lot of them are re-treads? Pretty close to switching them out for Goodyear Marathons.

Link to comment
Share on other sites

  • 0

Carlisles.. are round and they roll. They dont last very long and there has been way too many issues with them. Some due to operator error(tire owner), and way too many other problems just because they are a poor quality tire, but they are economical and popular because of it. I think all trailers that have 12" and 8" wheels come with Carlisle tires standard... because they save the manufacturer money, and they are readily available.. not because they are a decent tire(they are not). Its similar to the Firestone situation with Ford in the past, and notice most light trucks had Good Year Wrangler RTS tires on them for a long time? Manufacturers put tires on that are cheap.

If you are stuck buying Carlisle because of availability, buy more tire than what you need(higher load range) and you shouldnt have so many problems, but they will not last as long as a quality tire. Keep your tire properly inflated to max pressure(usually somewhere between #40-#80 psi).

Over loaded tires are going to be a problem no matter what brand they are.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • Blessed Christmas to all.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.