Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Superline for Jigging Rod


Recommended Posts

Just got a new rod that will be used primarily for jigging walleyes. I've heard many who like superlines for this set up. What kind do you guys prefer and also at what # should I be getting? Also, I've only used superlines on my musky rods where I needed to put some backing of mono on first. Do I need to do this with a spinning outfit as well?

Thanks.

Andy

Link to comment
Share on other sites

Andy,

I heard about your new rod. Sounds like a nice setup.

8# test in superline should be all you need for strict walleye fishing. You might take the other spool and run #6 mono. I like the smoke and crystal color that Berkley Fireline has to offer. I slightly prefer the fireline over PP as it seems to get less wind knots (which I can't stand). I've found the PP is a bit stronger, and holds knots better thou, so its pretty much up to each individual user. I run mono backing on all my spinning reels.

Link to comment
Share on other sites

Northlander,

Sorry, a wind knot might just be what I call them. They happen occasionally casting and retrieving. You might flip your bail (by hand) and not notice that the line is looped, or not tight to the spool. Then when you reel up and cast even further on the very next cast, you can feel the mini knot leaving your rod. As you tighten your line and reel in the knot, it's already too tight (most times) to fix/un-knot, so you end up cutting around 25 yards of superline off your reel and retying.

I know this is a walleye jigging thread, but I will point out that I get the majority of my wind knots while fishing topwater lures for bass.

Link to comment
Share on other sites

Ok, now I know what ya mean. I went away from Fireline because I found it at times layed into itself on the reel because its flat. The roundness of the PP seemed to help with the line coming off the spool better. Even mono will do it at times though.

Link to comment
Share on other sites

Northlander makes a good point here. Fireline is more of a flat style line where PP is rounded (similar to mono). Fireline is more app to be embedded into your spool after tension (snag, big fish, etc) that PP.

I've seen people get snags (and done it myself) and hold the spool with the rod tip pointed straight at the snag and pull like crazy till the stuff snaps. It only takes once to realize that your superline is totally embedding into your spool.

I learned a trick from some flathead catfishing clowns where they take and wrap their line several times around this mini-bat and then pull like nuts on this bat. It works and your’re not burying 80#pp deep into your spool.

Link to comment
Share on other sites

Hmmm... you walleye guys need to start fishing with bigger bait, therefore requiring bigger bait nets. These bigger bait nets make great tools for freeing your line from snags like described earlier.

I've seriously made 10 overlapping wraps around a wooden bait net handle and pulling and pulling and pulling on 80lb PP to only straighten out a 10/0 Gamakatsu. Unreal!! The stuff is amazing!

Link to comment
Share on other sites

Back when the Spider wire first came to market I had it on a trolling rod while trolling cranks on Mile Lacs and some jerk cut across the back of my boat to intentionally catch/cut my lines. As the line was stripped off the spool the line sliced into the guides. Is that still a problem with the new super lines cutting grooves and such in the guides and bails. HTB

Link to comment
Share on other sites

I have several rods set up for just jigging 1/2 are mono and the 1/2 Power Pro (10lb) . I have used it since it come out and have never ever had any probs with it, I love it.. When I'm jigging rocks or rip rap I use mono and all other times I use power pro.. OH yes and even still have some pink power pro on 2 rods grin.gif other wise all moss green line on the others

Jeff

Link to comment
Share on other sites

Superline works very well for deepwater jigging wich is right around the corner. You feel so much more with superline and you may need to wait a split second before setting the hook. I missed more fish when I first went to the superlines for jigging just because I was setting the hook a little early. Try using a small barrel swivel or bloodnot with 2 to 6 feet of mono or flourocarbon of lesser poundage tied to the jig. Mono is easier to tie, is less visible, and breaks easier if you get snagged.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.