Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Favorite chair or seat for a hub style house


Wirenut

Recommended Posts

Today was the first day fishing out my hub house. I second the director style because of comfort and the little table on the side came in a lot handier than I thought it would. It also seemed to stay put a little better than the other chairs. I added a couple rod holders to it and will provide a pic if you want to see it.

Link to comment
Share on other sites

I sit on the sled I built on skis. has a little shelf for drink and lures, holds the rods, minnow bucket and I mounted lights on the side to light up the inside when fishing. All my tackle and extra gloves and battery go under the seat. when I'm done fishing everything packs on top of it to easily pull off the lake.

Link to comment
Share on other sites

I use a folding chair with a welcome mat for my feet. The folding chairs take very space on the way out and welcome mat keeps your feet off the ice and helps to keep things from the magnetic pull of the hole.

Link to comment
Share on other sites

If I am not worrying about packing light, then Director chair for sure - Comfy & sturdy. If I want to pack light, I am fine with the 5 gallon bucket seat.

Beware of using camp chairs not designed for freezing conditions - there is too much plastic parts in key areas. Plastic they often use and cold temps don't mix well, gets brittle and can break easily in fridged conditions.

Link to comment
Share on other sites

I sit on the sled I built on skis. has a little shelf for drink and lures, holds the rods, minnow bucket and I mounted lights on the side to light up the inside when fishing. All my tackle and extra gloves and battery go under the seat. when I'm done fishing everything packs on top of it to easily pull off the lake.

could you provide a pic of this set up

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.