Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

gloves


cat-man

Recommended Posts

i have no experience with the vexilar gloves but i had a pair of ice armor mitts. they didn't keep my hands very warm and they were only waterproof until i got them wet. i bit the bullet and bought the snowsuit mitts and love them. the cost is worth the reward. they are durable and truely waterproof. also they do what any glove should do and keep my hands warm. these gloves and a pair of bunny boots and i don't even think about my hands or feet out there which is nice when you have more importnt things to do like catch fish!

Link to comment
Share on other sites

Another player to add the to the list to look is the Frabill SnowSuit Gloves.

I used a pair last winter and was very impressed with the Frabill SnowSuit fingered gauntlet gloves. They worked awesome for running the snowblower and for my ice fishing needs.

All are very good, the new Vex Gloves are very nice.

Link to comment
Share on other sites

I have tried a lot of gloves and choppers over the years. After years and years of sports and busting up my fingers my hands get cold easy.

The best fingered gloves I found were the upper line Ice Armor Gloves. The best choppers were the old school wool liners in a nice big leather chopper with a thin liner in it.

I have used the Ice Armor, Arctic Armor, Snow Suit and many other choppers and they worked great in the above 20's but when it got below 0 nothing could keep my hands warm like the old school choppers.

I have yet to find any glove that stays waterproof after wearing it for a month or more.

Link to comment
Share on other sites

I'll throw in my experiences as well. My wife bought me the Ice Armor gloves with the longer cuffs for a gift. First time out I was pulling up my underwater camera and wrapping the cord around the monitor. After 15' of cord the palms of my gloves were frozen stiff and my hands wet. I contacted Ice Armor and they were friendly and helpful and sent me another pair of gloves which arrived on a 2 days later. These too soak up any moisture they come in contact with. I'm going to spray them with some water repellant and keep them as spares. They are not very warm either. But the customer service was outstanding and I have other products of theirs that work well; just not these particular gloves.

Link to comment
Share on other sites

Almost all gloves and mitts will eventually leak. The big difference is the "eventually" part. The greater the number of seams, the more likely it will wear out and leak or just leak from flexing. The only type of gloves that I've ever owned that didn't leak are mass from neoprene. But the problem with neoprene is that it will make your hands sweat and then they will be cold and clammy. It seams that about every other season or so, I make the mistake of trying some new "ultra warm" neoprene glove that is still cold and clammy. Got quite a selection to sell on HSO-Classifieds now.

I wear a pair of windproof, fingerless and thumbless fleece Hand Socks most of the time when I'm actually fishing. When I drive the atv or sled, I'll wear the Ice Armor gloves or some other brand and know that they will get wet if tested.

I guess I've just learned to carry extras and expect leaks. It's too bad, because when Goretex first came out and was manufactured in the US, you could get real water proof gloves and mittens.

Link to comment
Share on other sites

Its funny, I was just at the big hunting/fishing store and was about to buy a pair of the Ice Armor gloves. But I held off because I thought to myself to check what all of the real people(not advertisements) that actually use them and their opinions are on HSO.

I also thank everybody for their opinions on this.

Link to comment
Share on other sites

I bought a pair of the lower quality ice armor gloves last year. I've been pretty happy with them but don't use them for hole hopping. They are simply for getting my flip over shack out to the spot and drilling cleaning holes.

I wouldn't trust them for a day outside on the ice, but they work great for light use.

Link to comment
Share on other sites

I've gone through a bunch of different gloves, but the best ones I've found are the Gore-Tex Pinnacle from Cabela's. They are spendy, but I have 3 pairs that are 4 years old and none of them have ever leaked a drop of water. Some friends have the Ice Armor gloves and mittens, and are happy with them.

As mentioned, stay away from anything neoprene. I've not had good luck with those, or the Arctic Armor gloves.

Link to comment
Share on other sites

I gave up on the waterproof stuff and am sticking with the old leather choppers myself. I usually keep a couple pairs of those and the deerskin gloves with thinsulate lining in the truck. I just switch off as needed.

I was thinking about trying the frabill stuff this year but every time I think I am getting waterproof I end up with wet hands so we will see. It would be nice to get a pair of warm gloves that are really waterproof.

Link to comment
Share on other sites

I've never met a waterproof glove/mitten that could keep hands warm. Like Northlander, I've tried scads of them.

When I'm out on the ice jigging for lakers in real cold, like him I use the leather chopper wool liner, and have a cheap pair of thin nylon stretch gloves on for when I have to kick off the choppers to play a fish. Inside each chopper is a dry chemical handwarmer. I've stayed warm jigging in -20 with this setup.

Always nice to get that chopper back on after releasing a fish in those temps, though! gringrin

In more moderate temps and inside the fish house, when I need something to go on the hands, after years of experimentation I've settled on a pair of standard fashionable fine leather gloves with thinsulate lining. My daughter got me a pair from Cabela's three Christmases ago, and I started using them for ice fishing and was really happy with how they worked.

No matter what hand protection I'm wearing out on the exposed ice, if it's cold enough I also keep dry chemical handwarmers in each side pocket so I can put my freezing hands in there quickly as needed. I'm about ready to start buying those darn handwarmers by the case load. Too many reasons I'm out in all harsh weathers for me not to buy stock in the durn company! smile

Link to comment
Share on other sites

For really good gloves look to skiing or mountain climbing. I'm completley sold on Grandoe gloves, there pretty darn spendy the good ones with gor-tex can be from eighty to a hundred or more per pair, but their not huge, their very warm i'v been snowmobiling in below zero temps with no problems not to mention ice fishing with the same gloves. I bought my first pair 16 years ago, the leather palm is shot from the tow ropes but their still super warm their just old and they stink, so last year I bough a new pair, just as good as the old ones. The only problem with them is when you can only find one of them you start to freak out because they cost alot of money. Good luck.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.