Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Thanksgiving?


WIFisher

Recommended Posts

I actually stood on ice yesterday in slough pheasant hunting, Then I fell through just over my boots! I thought I could sneak over a wet spot but only made it about 10 steps. There was pretty close to an inch in the cattails in the morning but the afternoon sun killed most of it. Without a clod snap it might be a while. Christmas?

Link to comment
Share on other sites

Today I saw a handful of canoes on lake Calhoun, couple of folks fishing from other boats, a windsurfer and a guy swimming! I sh*t you not, he stripped to his boxers and jumped in the west side of the lake! I'm guessing unless things take a serious change for the colder, It's gonna be a decent drive north to hit fishable ice thanksgiving weekend..... as big of a bummer as that is. I have taped and re-taped the reels to all my rods, charged the marcum etc etc.... I enjoy the warmth, but if it is going to get dark so danged early it might as well be 10 below and I might as well be out fishing on the ice!

Link to comment
Share on other sites

If the long-range forecast from Accuweather is close to being right, there is colder weather coming in a week. The forecast for the Rochester, Minnesota area calls for highs below freezing and lows in the teens after Sunday, November 29. Generally, I've found Accuweather's ten-to-fifteen day forecasts to be a coin toss in terms of whether they end up being close. The Weather Channel's ten-day forecast calls for a cool-down too, but with slightly warmer temps in a week than does Accuweather.

If the Accuweather forecast is right, it will take a few days for water to cool down enough to freeze--smaller, shallower water cools down quicker. My guess is people north of the cities will be out on the ice on many lakes in three weeks. Down here in SE Iowa, some of the small ponds may be ready by then if all goes well.

Link to comment
Share on other sites

looks like its gonna be a late start this year in Michigan too. Could open water fish in december that would be a first for me. Probably would too if we hadn't put the boat away for the winter

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.