Carbon Express arrows... nock issues?

[cupper]

I shoot the maxima hunter 350's. I have been having problems with the nocks coming out too easily... sometimes when I shoot the nock is still on my string, other times it pops off when I pull the arrow off the string after a day of hunting. Anybody else experience this or have any remedies?

Thanks!

[sticknstring]

You could try putting some quick drying glue around the nock. Let it dry and push it back in. I've done it a few times with Goat Tuff and it works pretty slick.

[Scoot]

A lot of knocks come off if you take the arrow off by pulling on the shaft (no dirty jokes please ) of the arrow. I always take my arrow off the string by pushing on the back of the knock.

As far as knocks staying on the string on a shot- sounds like a problem to me and I don't know what to tell you. I've shot Carbon Expresses (mine are CS's) for about eight years and never once had this happen.

[koonie]

Is your serving wearing out. After a while that area can wear thin. just a thought.

I've shot CE Maxima hunters without any issues for the last four years.

[CrowRiverRat83]

I would just go buy some adhesive. You usually can find it right in the same area of the store as the rest of the archery gear. I've had the same problems with the Carbon Express arrows.

[DonBo]

I'd try some new knocks...

[N7709K]

i would either get new nocks or use a little piece of grocery bag to shim it up

[fire29]

Same thing with me, I think I am gonna glue mine

[koonie]

Is your serving wearing out. After a while that area can wear thin. just a thought.

I've shot CE Maxima hunters without any issues for the last four years.

Sorry my answer doesn't make sense. A little under the weather and not thinking clearly.

[iceman1603]

Same situation here. little bit of adhesive did it. Just make sure the nock is true to your arrow..