SeaFoam in Auger Fuel?

[blackdog1101]

Do any of you regularly run SeaFoam in your auger? Do you just put it in as part of your regular fuel/oil mixture, or do you make a seperate blend just for cleaning the carb every now & then? Thanks!

[shaky legs2]

I usually put an ounce of sea foam in the auger gas (1 gallon container) and two ounces in the 5 gallon can of gas for the generator. I use it in every gas engine I have. Snow blower, boat, lawn mower, etc. It is the best thing every invented.

[Eric Wettschreck]

Before I started using Amsoil Sabre I put Seafoam in every tank. I have a one gallon tank mixed up just for the auger. I don't believe in "Mechanic in a can" bug Seafoam is good stuff and it works.

Now that I use Amsoil Sabre I don't mix in Seafoam. However, I will run a tank blended with Seafoam prior to storage.

[jwhjr]

I put an ounce in the gallon of gas (mixed 80:1 with Sabre) to help as a stabilizer.

[Neighbor_guy]

I always use seafoam. ALWAYS!! I am not quite sure how much, just dump some in, but I wouldnt run an auger without it.

[tisosy11]

I've noticed a little bit of ole coming out of the sides of the exhaust - i'm no motor expert and am wondering if this is alright or if i should get it checked out...let me know

[MLee]

 Originally Posted By: tisosy11

I've noticed a little bit of ole coming out of the sides of the exhaust - i'm no motor expert and am wondering if this is alright or if i should get it checked out...let me know

It depends on where Sven and Lena are.

[Jim Almquist]

 Quote:

It depends on where Sven and Lena are. \:\)

It is common for 2 strokes to have some oil coming out the exhaust and that is why I like the Amsoil pillow packs at 100 to 1. It burns so much cleaner that there is very little of the unburnt oil blowing out.

[tisosy11]

There is a lot of Ole when i am fishing with my grandpa...not any more oil though. I just noticed this...