Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

GPS power


Tinkhamtown

Recommended Posts

Do you have a cigarette lighter plug for it? You can buy a cigarette lighter receptacle with clips on it (try Fleet Farm) that you can then clamp to a Vex-type battery and power it that way.

Otherwise, I've heard that Energizer Lithium batteries last a lot longer than traditional alkalines in a GPS.

Link to comment
Share on other sites

Yes I have a cigarette power cord. A cigarette lighter receptacle with clips, I haven't seen or heard of this but now that I know about them I will be getting several. What battery works best for you? I have FL18, Scout II, Honda and Polaris ATV, deep cycle for fish house lighting, and truck with cigarette lighter receptacle.

Link to comment
Share on other sites

Quote:

Yes I have a cigarette power cord. A cigarette lighter receptacle with clips, I haven't seen or heard of this but now that I know about them I will be getting several. What battery works best for you? I have FL18, Scout II, Honda and Polaris ATV, deep cycle for fish house lighting, and truck with cigarette lighter receptacle.


You can plug your GPS right into your truck cigarette lighter receptacle with the cord that came with your GPS.

To run it directly off of a battery, you'll need a cigarette lighter adapter with alligator clips on it. Connect the clips to the battery terminals and plug your cigarette lighter cord that came with the GPS into the adapter. You now have almost unlimited power.

I'll run mine off my deep cycle marine battery in my permanent ice shack and then use a vexilar style battery on my snowmobile. Works slick!

Link to comment
Share on other sites

One of the benefits of my Garmin is its light drain on batteries. Mine is a Rino120 so it also includes a 2-way radio. Every year we go to Canada fishing and I use the same set of batteries over three and a half days of fishing or about 35+ hours of running time. Of course, if I use the radio too much that will definitely reduce battery life. The unit has a battery saver feature that slows the update rate for the GPS. I believe it is rated to run for over 40 hours on one set of three AA batteries using the GPS in battery saver mode and turning off the radio.

Bob

Link to comment
Share on other sites

I found a little gadget at Walmart that converts AC to 12 volt DC, so all i do is plug this thing into the wall and attahc my H2O's cigarette lighter into it. otherwise download the emulator from the HSOforum, it allows you to play with the GPS on your comp screen so that you dont have to use up batteries or sit in your truck.

Link to comment
Share on other sites

I have a handheld Garmin Vista. If you use the light on it or have the compass feature turned on it greatly effects the battery life. Under normal conditions I get about 10-12 hrs of operation on 2 AA's.

Jay

Link to comment
Share on other sites

DEADhead,

Are those powerpoints just connected with alligator clips, or did you find a better solution? Also, can you pick those 12V cigerette lighter adapters at the local hardware shop or did you find them somewhere else. I have been looking, but failing miserably.

Link to comment
Share on other sites

Purchased two cigarette lighter receptacle with clips for $3.89 each and boy do they work slick. Found they in the automotive dept. Found a special $9.99 for a spair battery 12 volt 7 amp and charger for scout camera and I'll be running the GSP off that battery.What store? MFF

Link to comment
Share on other sites

"I found a little gadget at Walmart that converts AC to 12 volt DC, so all i do is plug this thing into the wall and attahc my H2O's cigarette lighter into it. otherwise download the emulator from the HSOforum, it allows you to play with the GPS on your comp screen so that you dont have to use up batteries or sit in your truck."

That set off a flicker of thought, (a rare thing for me)......it finally came to me....got out my Rapala fillet knife, and sure enough..it has a 110 volt ac to 12 volt dc converter with a cigarette lighter receptacle. Plugged my H2O in and now sit in my chair with laptop and Lake Master program running.

Thanks for giving me idea!

Link to comment
Share on other sites

A thing about batteries is that different types may perform better under various circumstances. If memory serves me correctly, lithium batteries perform much better in lower temperatures than most.

Bob

Link to comment
Share on other sites

I would recommend rechargeable. The 2500am AA will last quite a long time. I have a case for my GPS and keep an extra set in it, but have never been out that long to wear them out. I did hear that one manufacturer does not recommend them because they are 1.2v and not 1.5 like other batteries. So you may want to check that out. But, the rechargeable have many uses and you can charge them in your truck as well.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.