Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Wanted: Bullheads


Rainman

Recommended Posts

I am in need of a spot to catch bullheads for catfishing. The creek in which I catch all my bait does not have a single bullhead in it this year! Any information would be great!

Thanks!
Rainman

Link to comment
Share on other sites

As far as the Southern metro and farther down, try O'Dowds or Thole by Shakopee. I personally fish the Cannon River chain wherever there is a dam or a bridge from Lake Gorman to the Faribault area. Look for some county drainage ditches. They sometimes produce. Kind of tough right now with all the rain but should be OK by mid week.

Link to comment
Share on other sites

I was just at the anoka dam yesterday trying to net shiners and chubs but all I could get was bullheads. Thousands of them are piling up down there. just grab a small holed, wide mouthed net and give it a swipe. You'll have a days worth in one shot. This might be kinda far from ya though. But if you can get there, they are sitting by the rocks underneath the foam, by the smaller dam thing.

Link to comment
Share on other sites

Aquaman,
I don't know how far your willing to drive for some bullheads, but there's a nice little lake up here in collegeville by ST. John's that i catch em out of. I havent been fishing it long, so i don't know how many there are. Hope it helps.

Link to comment
Share on other sites

Simplefish -
I think I know the place you are talking about. Is it in Peninsula Point Park? A little creek, a little dam, and a lagoon? If that's right - I'm there very soon!

------------------
Aquaman
<')}}}}}><{
Peace and Fishes

Link to comment
Share on other sites

Yah, it's right next to it. It's just up the road, right under the dam. Park in the big parking lot somewhere, and walk down on the rocks below the dam. There should be a little spot right away where all the foam is collecting, just scoop 'em up. This is on the easternish side of the dam. It's hard to explain. Hop the fence, go strait down to the nearest water you can get to below the dam, it's a box shape with one side open. 2 sides are rock and one is the walkway. The walk way that is over part of the dam should be directly on your right. Put the net out as far as it will go and pull stait at you fast, make sure the net has smaller holes or they will go right through. Once you get there you will know what I mean. Hope this helps. Let me know how you do. When there is high water they tend to stack up in there.

[This message has been edited by simplefish (edited 07-02-2003).]

Link to comment
Share on other sites

SIMPLEFISH -
Thanks A BUNCH!!! for the spot!!! I got a couple of dozen right where you said to look! Netting didn't quite work out. They scattered from view when I tried to dip-net them, so I angled them all canepole style and filled the bucket in no time! I bet an umbrella net would do the trick. Never been there before - pretty cool.

Not very kid-friendly fishing there until the water is lower and the floating dock is more accessible. If anyone takes a little kid there - remember to pack the vest, please.

Thanks again!! grin.gif

------------------
Aquaman
<')}}}}}><{
Peace and Fishes

Link to comment
Share on other sites

Glad to hear it worked out for ya. Did you catch anything on those little guys? I need details, I haven't been out for almost 2 weeks and I need a fix. If I can't catch em' I like to hear about someone else who is. I'm watching a friend of mines' house while he's in europe and his yard takes up a bunch of my time and energy. Good luck out there.
Deffinatly not kid friendly, the current is very strong and the water rises very quickly. I suggest the floating dock for the kids just down river a hundred yards or so. Life vest a must. Tie the little one to the dock, seriously. The under tow is very strong.

[This message has been edited by simplefish (edited 07-11-2003).]

Link to comment
Share on other sites

10 lb. flat on the Minnesota in Shakopee. My first flat. Those bullheads last forever! (well, except the ones I don't cast-off wink.gif )

Thanks again. Yard work stinks - my wife mows, I shovel. If mowing was my job, the kids would need little flags on their heads so we could find them at dinnertime.

------------------
Aquaman
<')}}}}}><{
Peace and Fishes

Link to comment
Share on other sites

I may be wrong hear and if I am would someone please let me know what the rule on this is. The rules say that a fisherman may not use any part or whole game fish for bait. Now with a Possession limit of 100 aren't Bullheads considered a game fish. Just wondering

Link to comment
Share on other sites

In 2000 this is the e-mail I sent the DNR and what they sent back.

Bob Schlueter 02/18/00 06:00PM >>>

I talk to a Catfish guide who said that you can use Bullheads under 5
inches for bait, Is this true?
He also said that he has signed affidavid that says this.
If you cannot anserw this can you tell me who I would contact to find this
information.

REPLY FROM DNR

Yes, it is legal to use bullheads under seven inches as bait. Bullheads less than seven inches are defined as minnows in Minnesota Statutes.

Link to comment
Share on other sites

yep, 7 and under. to a lot of people they are considered the best bait for big flats. flats rutinely eat other catfish, any fish smaller than the flat has an invitation to dinner. cut off the spines around the pecs, i heard that this helps in hooking up and releasing scent into the water. hook them under the adipose fin, you wont get snagged as much.
on another note, ya i heard that bullheads can be frozen almost solid in a lake that has frozen out and still come back after thaw. they don't need water to breath either, they can breath through thier skin as long as they are wet. often burowing in the mud if water levels are low.
yard work=no fun. but tomarrow is the last day, so i will be out in full force.

Link to comment
Share on other sites

You may not use live or whole bullheads on the Red River through, due to the ND/MN boundary waters regulations.

Bullheads used for cut bait is OK, just not alive, or whole.

You may not posses or be transporting live or whole bullheads on the Red River either.

Be sure not to have them on the ND side, it is a $250 fine.

------------------
Ed "Backwater Eddy" Carlson

Backwater Guiding "ED on the RED"

Link to comment
Share on other sites

Sounds like I need a bigger bait tank in the basement!

It's the "Summer Of The Bullhead". Now that we've worked out this awesome FishingMN.com secret weapon....delete the thread. :P

Just kidding.

I'm gonna have to invent a bull-headed quick-strike rigs for fall northerns, now.

------------------
Aquaman
<')}}}}}><{
Peace and Fishes

[This message has been edited by Aquaman01 (edited 07-15-2003).]

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.