Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Back by popular demand... Moosehunter's Green House

Moose-Hunter

By Moose-Hunter
in Ice Fishing

 Share

Recommended Posts

Moose-Hunter Mentor

Moose-Hunter

Posted
Posted

Howdy All...

After receiving a ton of emails about my budget build perm, here she is again... I'll begin by posting pics and see where that takes us... It's such a simple 8' x 8' design I think the pictures will be all that you may need to get started on your own...

FM03-walls.jpg

FM04Skidsontrailer.jpg

FM05-Skidholeframing.jpg

FM06-Wallpanelassembly.jpg

FM07-Cornerbottomassemblydetail.jpg

FM08-Detailpanelroofconnections.jpg

FM09-Cornertopassemblydetail.jpg

FM10-Roofsupportcenterdetail.jpg

FM11-Detailventholesheaterhanger.jpg

FM12-Windowdetail.jpg

a>

This house is completely modular and stores easily in a corner of your garage. It's light weight and has been out on as little as 6" of "good" ice. I have pulled it out on foot -or- it tows behind the 4 wheeler like it's not even there. Heated with a standard Buddy heater, you're down to t-shirts even in -0* temps...

I built my Lil' Green House more than 6 years ago and it's still going strong. With only a fresh coat of paint last year, and a few creature comfort mods...

I have a write up on the build someplace in this mess I call a computer. If need be, I'll put the dog on it's scent and see if we can track it down...

Enjoy!! <img src="/forum/images/graemlins/grin.gif" alt="" />

Link to comment
Share on other sites
Moose-Hunter Mentor

Moose-Hunter

Posted
  • Author
Posted

Hey thanks for the kind words!!

Total cost of the house was estimated at between $600 and $700. I'm sure it could be done for a lot less depending on design mods and materials you "happen to have on hand". I also went with a EPDM (rubber sheet) covered roof and that alone up'd the final cost a bit...

All things considered... cost of build vs. fun factor... many limits of crappie, a dozen eye's over 27", a 42" ski... it was well worth the price of admission. wink.gif

Link to comment
Share on other sites
McGurk Grand Master

McGurk

Posted
Posted

great looking execution of a great idea. couple of ?'s:

is the floor 2 sections? if so, how are they secured together on the ice?

how are the walls secured to the floor/roof: lag bolts?

is it a 1, 2,or 3 person job to assemble on the ice?

how thick is the floor plywood/ roofing material?

thanks.

Link to comment
Share on other sites
nitroant Community Regular

nitroant

Posted
Posted

Nice, simple little house. I have seen a few of these over the years and thought about building one, but, never have. What did you use to cut the foam out at the connection points, it looks too nice to be a utility knife. Did you make the windows, or buy them some where. What is the thickness of the chip board? Is the roof just two pieces that get dropped into place?

Link to comment
Share on other sites
Moose-Hunter Mentor

Moose-Hunter

Posted
  • Author
Posted

Quote:

great looking execution of a great idea. couple of ?'s:

is the floor 2 sections? if so, how are they secured together on the ice?

how are the walls secured to the floor/roof: lag bolts?

is it a 1, 2,or 3 person job to assemble on the ice?

how thick is the floor plywood/ roofing material?

thanks.

The floor is made in two sections. Both about 4'x8'. And insulated!! smile.gif both halfs are bolted togeter in two spots at the front and back of the skids.

YES... Lag bolts secure the wall sections to the floor and regular bolts handle the panel-to-panel, as well as the roof connections.

Being single, one person is all it really takes to assemble the house. However, if its a bit windy, an extra hand is always welcome...

The floor is a "sandwich" of 1/4" OSB bottom layer, 1 1/2" insulation, then 1/2" treated ply...

The roof is made of a bit of 2x2 framework, covered with more 1/4" OSB and the EPDM rubber over that. with a overlapping seam at the peak, the roof has NEVER leaked..

Link to comment
Share on other sites
Moose-Hunter Mentor

Moose-Hunter

Posted
  • Author
Posted

Quote:

Nice, simple little house. I have seen a few of these over the years and thought about building one, but, never have. What did you use to cut the foam out at the connection points, it looks too nice to be a utility knife. Did you make the windows, or buy them some where. What is the thickness of the chip board? Is the roof just two pieces that get dropped into place?

I used a plain hacksaw blade to cut the foam and a hole saw to make the circular cut-outs at the connection points. A bit messy!!! But it worked well...

The windows are home made. Cedar framing and 3/16" plastic, single pane. It does fog/frost up at times but not very often. Only on REALLY cold outtings...

All the OSB is 1/4". Primed and painted. The floor is 1/2" treated plywood.

The roof is made of two sections that overlap at the peak. Each section is slid into place after the walls are assembled. Then, they are bolted to the top of the walls and to each other.

Link to comment
Share on other sites
I_Love_Nuge Explorer

I_Love_Nuge

Posted
Posted

I've been making plans for a house just like this. I'm curious to why you used 1/4" OSB? I was planning on using 3/8" plywood because its fairly cheap and more durable than OSB. I just figure that the 1/4" OSB isn't very durable and would soak up any water that would get into it. Although its about 10 pounds lighter. I work at Home Depot so I have been looking at lumber quite a bit now. Finally, how heavy do you think it all weighs? Looks like a great shack.

Link to comment
Share on other sites
JigginIsLife Experienced

JigginIsLife

Posted
Posted

i was wondering on the supports on the bottom is there anyways you could get a pic of the bottom of the floor. this is where alot of weight can be added on accident. did you use 2x2s for the corners and wall studs. then the flor is framed in by 2x2 and the runners 2x4s. What did you outline your holes with the 2x's again??

Link to comment
Share on other sites
Moose-Hunter Mentor

Moose-Hunter

Posted
  • Author
Posted

Quote:

How long does it take to put that baby together, now that you have done it a few times?

I usually assemble it at home, right on the sled trailer. Doing this, I can git-r-done in about 45 minutes to an hour. Depending on consumption. wink.gif

At the ice's edge, about 30 minutes with common hand tools...

Link to comment
Share on other sites
Moose-Hunter Mentor

Moose-Hunter

Posted
  • Author
Posted

Quote:

I've been making plans for a house just like this. I'm curious to why you used 1/4" OSB? I was planning on using 3/8" plywood because its fairly cheap and more durable than OSB. I just figure that the 1/4" OSB isn't very durable and would soak up any water that would get into it. Although its about 10 pounds lighter. I work at Home Depot so I have been looking at lumber quite a bit now. Finally, how heavy do you think it all weighs? Looks like a great shack.

I used the 1/4" for weight concerns only. With proper sealing, the OSB has held up great. No moisture problems... yet. Plywood would be a better choice for the durability, but as you said, it does weigh more.

I have gone the extra mile with sealing or painitng all the edges after any cut. However, I must say, I never thought the thin OSB would last as long as it has. I am honestly surprised... cool.gif

Link to comment
Share on other sites
Moose-Hunter Mentor

Moose-Hunter

Posted
  • Author
Posted

Quote:

i was wondering on the supports on the bottom is there anyways you could get a pic of the bottom of the floor. this is where alot of weight can be added on accident. did you use 2x2s for the corners and wall studs. then the flor is framed in by 2x2 and the runners 2x4s. What did you outline your holes with the 2x's again??

In the pics, you see "gussets" in each corner of the wall panels. These were removed prior to final assembly to eliminate more weight. Also, the windows were going to be in the locations shown in the pics, and that was change as well to it's current design shown in the final pic.

A pic showing the underside of the floor would be useless as all you would see is a flat painted piece of OSB. The floor is made like a sandwich with 1 1/2" insulation between the OSB bottom layer and the 1/2" treated ply upper layer. With a flat underside, I've pulled this house through deep snow with no problems as it kind of planes it's way on top like a sled.

The skids are made with 2x6 runners (I had these "in stock") that bolt together in the middle, with (4) 2x4's (layed flat on their widest surface) connecting them. Other than the (4) 2x4's and the hole framing, there are no other "joists" between the skids. After all the ice time this house has seen... The floor is as sturdy now as it was when it first hit lake... No soft spots to be reported at this time...

Each hole was framed in using 1x cedar. Using two layers, I was able to create the ledge used to hold the "flush" fitting hole covers. It is a 6 holer. 4 to fish from, 1 bait/live well and the other, a "fridge" to keep your favorite beverages cold and crisp...

wink.gif

Link to comment
Share on other sites
Sandmannd Grand Master

Sandmannd

Posted
Posted

Moose Hunter, that is a great shack!! I remember seeing it before. Did you ever find your write up plans for it? I would really like to build one of these. Can you let me know your email addy so I can email you and see if I can figure out how do to one of these??

Link to comment
Share on other sites
sonoranhope Apprentice

sonoranhope

Posted
Posted

Moose Hunter~ You have the right idea on the 8X8, good work. Its the shack I always pictured in my head, but totally different than the one that ends up on the ice.. Well done and great pictures. it sounds like more pics would b in order though. I like the hole cover U went with.... Thanks for the idea(s) and hope to show off my next shack as well as U did.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept