Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Colored Depth finder

marbleye

Asked by marbleye,

 Share

Question

marbleye Contributor

marbleye

Posted
Posted

I'm in the process of buying a new colored locator. Just wondering what people thoughts are on which kind and model to buy? I was looking at the Lowrance x25 or Eagle 2000 fish strike w/gps. Any comments would be greatly appreciated....<>< <>< <><

Link to comment
Share on other sites

5 answers to this question

Recommended Posts

  • 0
BobT Grand Master

BobT

Posted
Posted

I purchased my first color unit, a Lowrance X67C, this past spring and I am very pleased. Good resolution, easy to see in daylight as well as dark, plenty of features to fine-tune it to my preferences.

Bob

Link to comment
Share on other sites
  • 0
Hookmaster Mentor

Hookmaster

Posted
Posted

Humminbird 777c2 or 787c2 if you want gps. I've documented 2.75 inch target separation (2 quarter ounce jigs tied close together) in 35 feet with the 777c2. For graph purposes, I think these are better than Lowrance. I don't know about the gps, but I think they use Magellan components.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to question listing


  • Your Responses - Share & Have Fun :)

    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chef boyardee pizza from the box!
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Enchiladas 
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Venny neck roast!
    • Wanderer
      Merry Christmas

      By Wanderer · Posted

      Or he could go with leech~~~~~
    • Big Dave2
      Merry Christmas

      By Big Dave2 · Posted

      Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
    • hugonian1
      Merry Christmas

      By hugonian1 · Posted

      Blessed Christmas to all.  

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept