Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

staying warm


Stoneman

Recommended Posts

What do you wear when using portables in 0 degree weather and deep snow. Need to be comfortable and still move without over heating. Best boots for driving sled or Atv and keeping warm while sitting?? Tks guys

Link to comment
Share on other sites

I don't know what is best, but I wear snowmobile boots rated for 100 below which keeps my feet warm while driving my ATV or walking around. I bought an anti-fatigue mat at Menards for a few bucks that I put under my feet while sitting still. This keeps the cold from transferring from the ice to my feet. Stand by for 10,000 other opinions. grin.gif

Link to comment
Share on other sites

I wear a pair of Hodgman -100 pac boots with a pair of carhart bibs and a fairly heavy coat.Once the house is up,the bibs and coat come off and getting cold is never a issue.This winter my wife tells me I need a new suit for fishing.I dont know yet if it will be a Ice Armour or what but it will be something.For years the carharts worked just fine and are pretty durable.

Link to comment
Share on other sites

For 20 years I used Iceman's and never had any problem with keeping my feet warm. Two years ago I got a very good deal on some Rockys 1000 G's and have had excellent results with them. When I use my portable tent I use a piece of thick jute back carpet to rest my feet on. This is very effective and stores very easy when I'm moving around.

Link to comment
Share on other sites

I don't think it's the under/outerwear that matters much when fishing portables, but rather the importance of finding warm boots. That has always been the issue with me, and it sounds like a lot of others too. Once my feet get cold, I start to get uncomfortable out there....

Link to comment
Share on other sites

This will be the second season out with my Nautilus suit. Although abit bulky, it has a built-in Suspenders. The top part of the Suit can be pulled down and not in the way when I'm in my Portable. I'd much rather be abit over dressed to keep warm than be underdressed. Bonus is that it's also a PFD for those like myself who venture out during early Hardwater.

PS: I'm from the land of Buckle Bunnies and Stetson Studs...

Calgary, Alberta(We all don't live in Igloos)LOL

Link to comment
Share on other sites

Rocky Snowstalker boots. They are a bit big and clumsy, but they keep your feet warm. Don't plan on wearing them while driving a vehicle though as they are too big.

Columbia Omni-Tech parka and bibs have been working for me for years to keep me warm. Can't beat them. They are also waterproof and keep you dry which is the big thing, especially when you do a lot of kneeling on the ice working tip-ups, etc.

Link to comment
Share on other sites

The best I personally have found is Cabela's Guidewear Raingear insulated bibs and jacket. I always used to have Carharts but the raingear is waterproof compaired to my carharts. Now the extreme Carharts would be better than what I currently have for Carharts but I haven't need to purchase a new set. For boots I used a pair of Rockey 1000 gram gore tex boots and while they were nice I would still get cold on occation so last year I picked up a pair of Sorel boot and I cant remeber the model. It looks like they are discountinued this year but a similar model would be Sorel Alpha Trac Boot. They are were much less bulky than the Glacier model of sorel and more comfortable. The down side is they don't have liners but they are extremely comfortable and warm. I never got cold once with them last year. I think for ice fishing a good pair of pack boots is more important than anything. I didn't like the bulk of them in the past but there are several now that are very comfortable to wear for extended periods. I also like the added height of the boots. I tuck my jeans into the boats and run with my bibs over the boot and at the end of they day when heading home I have dry pants which is very nice.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.