Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Placement Of Rattle Reels


freezdried

Recommended Posts

I am getting ready to mount my rattle reels in my new fish house. Should I put them Knee high, waist high, or by the ceiling? They are Lindell Ice Rigs so they are removable when not in use. I have heard some folks say to mount them up high to keep them out of the way. What do you think?

Link to comment
Share on other sites

I didn't have them in my previous shack but I think I'll mount them high up in my new shack. I fished out of a shack at the LOTW last winter and they had them mounted 6 inches from the ceiling. That seemed to work good.

Link to comment
Share on other sites

I like mine at eye level when siting so you can see the small movements that don't rattle the reel, i have seen them mounted high and I don't care for that set up myself. You are rite if you want them out of the way just get the kind you can take off and put away

Link to comment
Share on other sites

Ihad mine waist high but changed them after jiggin for eyes kept hitting them with the rod tip when I would set the hook. I found at a garage sale a couple of buzzer set ups that I,m going to try. I,ll try to get some pics on later.

Link to comment
Share on other sites

I'm not sure what brand mine are. I think their called Mille Lacs rattles, but they are the wood spindle ones with the bells in it. I got them at the BP gas station up at mille lacs next to trophys bar and grill. I like the wood ones because they seem to make more noise than the plastic ones. they do come apart with a plastic wing nut.

Link to comment
Share on other sites

i use the wooden bell type as well. and they are mounted ceiling height. i like the weight of the line to help offset the roll of the reel. also it keeps them out of the way when augering. ... paul

Link to comment
Share on other sites

Great topic, here goes. Thus far, nobody got this yet:

Ok, if you get the real deal Lewandoski rattle reels, like they sell on fish house supply or at Unclaimed Freight in Milaca, you can purchase or order EXTRA mounting brackets for them for a couple bucks, then you can have them mounted "high" during the day, and if you are sitting down, move em to a lower position. The little bracket is almost unnoticable on the wall-- most better bait shops sell the little bracket, the Lewandoski Rattle Reels just drop into them.

Hope I did not drop too many names there... my bad!

Link to comment
Share on other sites

I mounted mine on some swing arms on a hinge to move them when not in use. They are about thigh high. I have two others that are removable that use a socket and pin type setup that I take out for travel. I use small bungies to hold them against the wall when not in use. Here are how most of mine are mounted:

Rattlereelmount.JPG

Link to comment
Share on other sites

I preferr on the ceiling. That what you can place a marker at the rattle reel and see it easily when laying down and it is just easier to feed line set hook ect if you don't have to bend down to get at it.

Link to comment
Share on other sites

elwood i have a way to improve your buzzers.

cut a small notch in the rim of the reel with a hack saw...only a couple of mm deep. this will allow you to use a bobber rod instead of hand lining. you put the line of the bobber rod in the notch and and spin the reel until it is almost to the buzzing point but not quite. fish takes your bobber, spins the reel, sets off the buzzer and then you can fight it with the rod

if you like doing it by had cool, but if you like the rod better, thats the best way to go

Link to comment
Share on other sites

None are as good as the Original Lindells. I mount them high so they are not in the way. I just pull up on the line to jig them. You can also get extra wall bracket for them too. You can mount them to a bucket and use them for tip ups too.. Or that is handy when fishing outside.

Link to comment
Share on other sites

Place them high enough so they aren't in the way, and go with the Lindell Ice Rigs, they are by far the best rattle reel on the market. No wingnuts, no unwanted line vibration, and the smoothest spinning spool there is. The Lindell Ice Rigs are quality constructed and you get what you pay for. I also like the rod holders which are pretty ingenius in their own right for using with my spinning rods.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.