Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

LMS-332c

Ryan Berger

By Ryan Berger
in Walleye Fishing-Perch

 Share

Recommended Posts

Bushwacker Mentor

Bushwacker

Posted
Posted

I saw it at the NW Sportsman Show for $599.99 and I have seen it on a HSOforum for $599.99. I have never bought anything the HSOforum personally, but I have been told it is a great with shipping and availability. I ended up buying mine from Cabela's because of my points and gift certificates. I started hooking it up last night and a person almost needs to be a master electrician to hook it up.

Link to comment
Share on other sites
Bushwacker Mentor

Bushwacker

Posted
Posted

I don't know if there is really any specific problems to expect. I just ran into the fact that the plugs are too big for the normal transducer holes on my boat, the network, power, and gps hookups are a little confusing. I am not sure whether to hook up just the normal power, or hook up the NMEA constant power also. I think if a person gives himself a couple of hours to do it you should be fine. It is just the first GPS/sonar combo that I have hooked up and it is a little different than the normal sonar only units.

Link to comment
Share on other sites
PerchJerker Grand Master

PerchJerker

Posted
Posted

I got my 332c for $619, no additional tax or shipping charges. I've got several friends that have ordered from the same guy (on-line) and he's great to work with and we've all been very happy with him. He's affiliated with another forum so the link would probably get killed here, but if you give me your email I'll pass along the info if you're interested.

The 332c is as easy to install as any other sonar or gps combo. Only thing out of the ordinary is you need to connect 2 sets of power leads to your battery - one for the unit, and 1 for the gps antenna. The 'knob' on the transducer cable was slightly too large to go through the holes in my splashwell, but I ground it down slightly with a dremel tool until it fit through the hole.

Link to comment
Share on other sites
Captain B.R.K Veteran

Captain B.R.K

Posted
Posted

LundDuckBoat - Called down to Cabela's in Owatonna and had them ship it to me. I have a Cabela's visa card- so used some cash on it towards the purchase. Ended up getting it for like $590-599 before all the taxes and shipping.

PLUS I got money on the deal because that cost (doubled)went on my card in cabela's points cool.gif

Link to comment
Share on other sites
Bushwacker Mentor

Bushwacker

Posted
Posted

I got mine all hooked up and took it out fishing. Instead of reading all the instructions over and over, I just hooked it up and everything works. The confusing part in the manual was the two power leads like PerchJerker mentioned. The thing is awesome. Guys in the back of my boat could read it just as well as I can sitting right in front of it. The Lakemaster Pro-MN chip is also awesome. It shows every little detail right on. I have about a 15 acre pond in my backyard and it is right on the map. Wow!

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • rundrave
      Problems with Yetti

      By rundrave · Posted

      got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • Macgyver55
      Random Daily Pics

      By Macgyver55 · Posted

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept