Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Difference between the LMS332 and the 330?


waskawood

Question

Can anyone tell me what is better about the LMS-332c over the LMS-330c? I can buy a new 330 for a hundred bucks cheaper than a new 332. I don't want to be frugal if the newer version is that much better. Thanks for any help.

Link to comment
Share on other sites

12 answers to this question

Recommended Posts

  • 0

A bigger display...That is it. 332 Has a 480 display and the 330 has the 320 display. I have the 330-LMS and it is a great unit. Now all I need to do is get the Lakemaster MMC chip and it will be ready for open water season this year.

Take care!

Link to comment
Share on other sites

  • 0

Waskawood, I bought the 330 last year and it works great. The 332 has more pixels so the resolution is greater but the 330 is very clear and easy to see with my 53yr old eyes,even in bright sunlight. I'd get the 330 and spend the extra 100 on a lake maps chip.The screen size is the same in both units. Good Luck DrJ.

Link to comment
Share on other sites

  • 0

The screen on the 332 is bigger than on the 330. Lowrance's specs say that both are 5 inch screens, but if you look at them side-by-side in a store you will see that the 332 is clearly a larger screen. Not a lot larger, but definately larger.

And as the others have mentioned, the 332 has a higher pixel count and therefore better resolution.

I bought the 332 this year. I figured with a sonar/gps combo unit I wanted the bigger screen. I wanted the higher resolution to get the most out of the mapping features, and I use my sonar constantly to pick apart the bottom or look for suspended bait and fish so I wanted the higher resolution for that too. I'm not saying there's anything wrong with the 330, I'm just saying that for me the 332 was a better way to go. Good luck with your choice.

Link to comment
Share on other sites

  • 0

M-Muskie- Lake chip??

If you are talking about the LakeMaster Chips- then yes! Would you rather try to mess with a map and figure out a general spot or would you like to be looking at your Map screen and see (as you are crusin' along the water) 25ft, 24ft, 23ft,....19ft BINGO I found the flat cool.gif Easy as 1-2-3!

Link to comment
Share on other sites

  • 0

OK...OK...It is only money...I can make more next week.

I just abouted mounted my old unit back on the boat today...but I knew I had a meting in St. Cloud tommorrow. I guess I will stop and pick one up. Scheels said they were getting more in on Monday.

Thanks guys...I am sure mama thansk you as well.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.