Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

question for the experts


jigemup

Recommended Posts

just bought indy 500 only had so much money set aside for sled i weigh around 240 and my wife is 140 sled runs like a dream but was wondring if this sled can handle two riders for about a 30 mile jaunt across lake of the woods i know it wont be the most comfortable ride but was just wondering if the sled can handle it

Link to comment
Share on other sites

Yes.

I wouldn't hesitate to do it myself on a 500.

Might just want to make sure everything is functioning efficiently in the cooling system. I had a 500 that overheated twice on me scorching a cylinder each time.

Link to comment
Share on other sites

Mine is a '93 Indy 500 LC, I weigh around 200, with the wife strapped on, (she's around 150), it is hard to keep it under 30 mph so she doesn't come off... Plenty of power, handling OK. It's a little tight, but that's togetherness! Remember to stretch now and then. A backrest might be nice.

Link to comment
Share on other sites

jigemup,

You may also want to consider setting your rear shocks a bit stiffer for the extra weight, so that your not bottoming out the tunnel on bumps. Watch for pressure cracks too. Have gone from long point up to Garden island a few times. Take a gps if at all possible and a backup compass, it all looks the same if your not on the staked trails out there and a blow comes up.

Link to comment
Share on other sites

If your going to do it often I would look into a set of heavy duty spings for the rear, especially if you find yourself bottoming out at all...it would not be required though.

If you have the money you could also into a seatjack for more sitting space....if needed. They are a little spendy and run around $400...

Link to comment
Share on other sites

Yes. GPS is a MUST! As for the ride, Tighten your rear spring as tight as allowed. If it's still too loose, a new shock isn't all that expensive. I don't know how much you know about sleds, but the forward rear shock handles the load. Simply turn the spring tighter and wallah!

But a word of caution...Tighten your spring all the way, and you could break something in the suspension.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.