sage123 Posted January 14, 2016 Share Posted January 14, 2016 For those of you who have a diesel truck, how much ice does there have to be before you feel comfortable driving on the ice? I just purchased a ford one ton crew cab and have a 16 foot lake of the woods ice castle and I am not sure what is considered ok to drive on. Mnsonny 1 Quote Link to comment Share on other sites More sharing options...
1lessdog Posted January 14, 2016 Share Posted January 14, 2016 I had a F350 Superduty diesel with a topper and pulling a 14 ft fish house. And was driving on 14 inch all the time. I do know a guy that had the same truck and was on 12 inchs all the time. Not me Quote Link to comment Share on other sites More sharing options...
Ufatz Posted January 14, 2016 Share Posted January 14, 2016 Sage: find a scale and determine the total weight of your combination. Then go from there, always erring on the side of safety. Quote Link to comment Share on other sites More sharing options...
sage123 Posted January 14, 2016 Author Share Posted January 14, 2016 The total weight fully loaded is about 12000 lbs. where do I find a scale to determine the safe ice? Quote Link to comment Share on other sites More sharing options...
SwivelDigger Posted January 14, 2016 Share Posted January 14, 2016 I have a 1 ton crew cab dually long box and a 16' plus the V and I usually feel pretty safe o 16 inches of good ice. Quote Link to comment Share on other sites More sharing options...
Lip_Ripper Guy Posted January 14, 2016 Share Posted January 14, 2016 There are two main charts out there: 1) DNR, and 2) the Army Corps of Engineers. Their recommendations are drastically different, but check those out. 15" of good clear new ice is a good number to shoot for, IMO. I've seen a diesel truck on 10" on Mille Lacs pulling a huge skid house, and 12" on a different lake pulling a 20' wheel house. My diesel truck won't see 10" or 12", empty. hoppe56307 and gunner55 2 Quote Link to comment Share on other sites More sharing options...
fishinfan Posted January 15, 2016 Share Posted January 15, 2016 I don't have a diesel, but I had my crew cab ram 1500 and 28' tandem wheel house out on 14"up at Red a few years back. Total weight was about 15000 lbs. I would prefer a minimum of 16" from now on though. Just remember you can still go down on 20"+. Ice is NEVER safe, and common sense goes a long way! Quote Link to comment Share on other sites More sharing options...
slurpie Posted January 15, 2016 Share Posted January 15, 2016 One thing to remember about this year is the ice varies a lot. I would almost bet there is not one lake in the state that has a solid 12" plus across the whole lake. It would take a lifetime of fish to cover the expense of dropping a truck and fish house in the lake. If it don't happen I would be surprised. I sold my diesel because I wanted to drive on lakes so I got a half tonner gas job. Quote Link to comment Share on other sites More sharing options...
sage123 Posted January 19, 2016 Author Share Posted January 19, 2016 Thanks for the replies. We went out on Red Lake this past weekend on about 14-15" of ice with no problems. Quote Link to comment Share on other sites More sharing options...
Gus Posted January 20, 2016 Share Posted January 20, 2016 On 1/15/2016 at 9:16 PM, slurpie said: One thing to remember about this year is the ice varies a lot. I would almost bet there is not one lake in the state that has a solid 12" plus across the whole lake. It would take a lifetime of fish to cover the expense of dropping a truck and fish house in the lake. If it don't happen I would be surprised. I sold my diesel because I wanted to drive on lakes so I got a half tonner gas job. This! Now, I saw your update, and I'm glad you had a good safe trip. Last weekend I was also out in the Grand Rapids area and on a lake where I normally find pretty decent Ice, I found anywhere from 10" to 14". ICE is varying a LOT this year. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.