I was at a BOAT landing yesterday this paticluar one was on Leech
There should be signs posted NO SINGLE CARS !!!!
There was 2 single suvs parked in trailer spots
I had to park down the road and back up a 1/4 of mile to get back to the
landing to load (not a big deal for me as I drive truck) could be a problem
for some and a nuisance in the roadway of passing traffic
there was also a trailer just sitting in a spot this I dont have to much of problem with if some took the vehicle somewhere, but if for some reasopn they split that the need a kick in the a$$
Some will say I'm going with guide,then you park down the road outa the way
or meet the guide some where and ride with him these are pulbic landings not free parking for businesses
not to mention I had to walk and extra half mile,which is not a real big deal ,but still
You can post now ↓↓↓ or ask your question and then register.
If you have an account, sign in nowto post with your account.
Note: Your post will require moderator approval before it will be visible.
got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....
Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.
Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.
Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I can't get logged in here on my laptop but I can on my cellular 😪
we had some nice weather yesterday and this conundrum was driving me crazy so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables, winch ratchet parts, handles, leaf springs etc).
I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.
For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.
I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches. I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
Question
gregg52
I was at a BOAT landing yesterday this paticluar one was on Leech
There should be signs posted NO SINGLE CARS !!!!
There was 2 single suvs parked in trailer spots
I had to park down the road and back up a 1/4 of mile to get back to the
landing to load (not a big deal for me as I drive truck) could be a problem
for some and a nuisance in the roadway of passing traffic
there was also a trailer just sitting in a spot this I dont have to much of problem with if some took the vehicle somewhere, but if for some reasopn they split that the need a kick in the a$$
Some will say I'm going with guide,then you park down the road outa the way
or meet the guide some where and ride with him these are pulbic landings not free parking for businesses
not to mention I had to walk and extra half mile,which is not a real big deal ,but still
Link to comment
Share on other sites
9 answers to this question
Recommended Posts
Join the conversation
You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.