Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Any tips for improving zipper perfomance?


NELS-BELLS

Recommended Posts

I just got a new hub ice shelter and I've been reading about all of the problems that people have with zippers. Is there anything a person can put on the zipper to make it work smoother, such as silicone spray, or maybe Arco Graphite dust.

Nels

Link to comment
Share on other sites

I just got a new hub ice shelter and I've been reading about all of the problems that people have with zippers. Is there anything a person can put on the zipper to make it work smoother, such as silicone spray, or maybe Arco Graphite dust.

Nels

I had a few difficult zippers on my Clam when it was new a few years ago. I rubbed a bar of Dial soap across the zippers [ while open ] and worked the zipper a few times. I've had no problems since then. Works real good on speaky belts as well. If you use a spray, it may weaken/ stain the canvas fabric over time. Graphite powder will make a big mess of the canvas. Only problem w/ soap is that it will wash out if it gets wet. No big deal though.

Link to comment
Share on other sites

I just got a new hub ice shelter and I've been reading about all of the problems that people have with zippers. Is there anything a person can put on the zipper to make it work smoother, such as silicone spray, or maybe Arco Graphite dust.

Nels

Chap Stick is good, most often is what I use as it is cost effective. Once or twice a season is sufficient.

Marine Grade Zipper and Snap Lube, Iosso E-Z Snap is very good, use sparingly. It does not contain solvents, silicon or teflon. It reduces the chances of torn covers near snaps and zippers. Will not wash off or dissipate, non staining.

zipperlube.jpg

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
    • Sketti...  not out of a jar either!
    • Lol yeah I watched that
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.