Venom Bobber Help

[bucksnort64]

I used the hech out of these bobbers this week and loved the range of jigs they will work with, but I did have one problem,

I was cutting the lower piece and it broke. so I call the guys from Venom and they told me .

#1 to cut at room temp.

#2 use side cutter or knife on hard surface cutting in single downward pressure.

I just to be safe put it in warm water at home and then no problem.

[EJ]

I don't usually ice fish at room temp. Now what?

[BlueLundFishrman]

I don't usually ice fish at room temp. Now what?

stick with the bobbers you been using?

[bucksnort64]

the bobbers have a wide range of jig usage without taking off, so I we give them a try this season ,so if that is what I have to do is cut with side cutter so I can switch from rod or rattle wheel faster cool, I can do that.

[so haaad]

I just watched the video. These should work pretty well for cats on the Horseshoe Chain.

[Neiko]

I ordered some last week and got them the next day. The video is convincing and can't wait to try them. I just got a St.Croix rod set up with one of them so hopefully I can get out soon. Why were you cutting them?

[Rick]

Here is the video:

[freezincold]

Hello all, I am new to HSO and I am the owner of Venom Outdoors. We designed the floats so a person does not have to remove them and can use the same float for multiple lure weights without having to cut the line. We have heard from a couple of people that when they want to make them removable, that they may crack when cut in the cold. We never had an issue with this in testing. If you do have one break, PLEASE contact me! We are working to resolve this. The plastic is simply stiffening more than we expected and may create a crack or break if cut in the cold. We have a new video that will be up in the coming days that will show many venom floats being cut and showing how to avoid this issue. We will also pre-cut them for you if you wish.

[Scott K]

These look great, and I can see in many cases where one of these bobbers would help catch a lot more fish. I will be getting some of these soon.

Freezincold, would it be hard to just make them removable? Is there any bennifit to having them not removable?

[freezincold]

The reason for not having the slot is to avoid the possibility of the plastic getting weak from removal and install. Given that these are adjustable, you really don't need to remove them when changing lures and baits (within reason). It is to make it more secure to eliminate the concern of losing if casting or simply falling off leading to frustrations. Hope that helps!!

[freezincold]

These look great, and I can see in many cases where one of these bobbers would help catch a lot more fish. I will be getting some of these soon.

Freezincold, would it be hard to just make them removable? Is there any bennifit to having them not removable?

Thank you for the good words also! We appreciatet that greatly!

[Scott K]

The reason for not having the slot is to avoid the possibility of the plastic getting weak from removal and install. Given that these are adjustable, you really don't need to remove them when changing lures and baits (within reason). It is to make it more secure to eliminate the concern of losing if casting or simply falling off leading to frustrations. Hope that helps!!

Understood, and I agree. But I am the person that will tie on my hook, then see the bobber sitting in the tray yet, so then I have to cut my line, retie my hook, to look down and still see the bobber still sitting in the tray, just to repeat it again .But that is my fault, and doesnt take anything away from your product. I will be ordering, and using these, and trying them out shortly.

[freezincold]

I am guilty of that also! We do have the provision molded into the part that can be cut to make them removable for guys like us. Give them a shot. I think that you will like what they do!

[bucksnort64]

I'm the same as you I have done that more then once on the same line. to much fun in fishhouse ! when you give the venom bobbers a try you will not be disappointed. good luck have fun catch lots of fish.

[DTro]

I like the adjustability of this bobber, but also would like to see it be removable without a retie. The less I need to retie the better, and unfortunately I’m like 4wanderingyes and will take 3 or 4 trys before I get all my ducks in a row , plus I don’t have enough rod/reels to dedicate one as a bobber rod.

However, having said that, the fishing I’ve done this year has been 95% bobber fishing, and it would be nice to test out the adjustability of these Venom bobbers.

I’ve put the competition through its paces, and it’s found a trusted spot in my arsenal.

Evolution is the name of the game though, so I might have to give these a try. If I do, I’ll be sure to post my thoughts.

[duckfarr]

just wanted to say I used my bobbers for the first time this past weekend and i loved the quick changeability from jig to jig.

It is very easy to set for the lightest of bites.

I wish i would bought more at the show. does anyone know if they will be at the show in January.

hook em hard

[maddowg1192000]

where can i get one of these to try them out, i looked at FF and GM in brainerd and nothing

[MJ1657]

Online ordering only I believe.

[bucksnort64]

they have link on the main forum page.

www.venomfloats.com

watch the video it will help with any questions you might have.

good luck

[Shack]

Removable or not, that does not matter much to me. I carry 6-9 rods with me at any given time and always have a dedicated bobber set-up. Even with that many rods under the bench, I am still busting line and retying jigs while fishing.

This looks like a good idea.

I like the weighted pin.

[sodajerk]

I ordered some from the Venom HSOforum and had them in two days. I haven't had a chance to use them yet, but they look good and are well made. Looking to get out and use them this weekend for the first time.

Their HSOforum gives extensive information on the floats with loads of text and illustrations showing how the different models compare. You can tell they put a lot of thought into the design and development of these bobbers.

The only model available right now (or as of last week anyway) is the AB (the most versatile model, due to length and diameter), with the other sizes coming out in "early 2010". I'll be looking for some of the AA, AC and AD sizes when available.

[Scott K]

I orderd my bobbers yesterday, and recieved them today, along with a couple extra pieces, thank you for the quick delivery, and your generosity! I will put them to the test, and let you know what I think! So far I like them.

[LMITOUT]

I just watched the video on the Venom Floats HSOforum and it's one of those products that makes you say "why didn't I think of that!". So simple yet so versatile. The ability to adjust the buoyancy quickly for any weight of jig+bait is the ticket for finicky fish that flee when they feel the resistance of a typical bobber that isn't sized correctly for the bait.

The other aspect that makes these floats appealing is that they won't take up a lot of room in the tackle box. Instead of carrying multiple bobbers of different sizes for different weights of jigs, you'll only need enough for the rods you're using, plus any spares in the tackle box which are smaller in diameter than a normal bobber which is another bonus.

I always have one hole with a bobber while I jig in another and these will definitely come in handy. Can't wait to give them a whirl.

[Double A]

Does anyone ever fish with a "slowly falling lure" as the video suggests?

Any success?

[freezincold]

Removable or not, that does not matter much to me. I carry 6-9 rods with me at any given time and always have a dedicated bobber set-up. Even with that many rods under the bench, I am still busting line and retying jigs while fishing.

This looks like a good idea.

I like the weighted pin.

We have our video up and running that demonstrates the recommended methods of cutting the slot in our floats to make them removable http://www.youtube.com/watch?v=Dgec0CFJmMQ We hope that this helps in making this operation easier for everyone. Please take a look at it and note that during the shooting (keeping in mind that I am not a Hollywood actor) we cut a total of 50+ parts without a single crack. The video will be on our HSOforum by the end of the day. Headed out to Lake Pepin this weekend. Maybe we will see you on the ice!