Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

T shot for geese ?


Recommended Posts

It was recommended to me that I use T shot for geese but am having a hard time finding it in our small town and no one seems to know what it is. Cant find much on web either. What exactly is T shot and is it recommended for geese ?

Link to comment
Share on other sites

BBB is largest I would go. With that said I prefer bb. It has more to do with a dense pattern than shot size within reason. I agree with previous replies. T's seem to wound more because of the open pattern. Within 50 yards bb's will put the smack down on geese.

Link to comment
Share on other sites

I would agree on the BB. If you cant kill them with BB then they are too far and we as hunters should not be shooting at them. Thats how geese get educated and decoy shy. I know quite a few people that also use 2 shot. Good luck.

Link to comment
Share on other sites

I have shot T and F shot out of my pattern master and killed alot of snow geese in the spring of the year. Did i need that size shot??? NO. One of the guys that went out there with us had a bunch of it and wanted to get rid of it. It does put a smackin on birds. But i personally shoot BB if i am going to buy shells.

Link to comment
Share on other sites

I use BBB just because it seems to kill em dead better. They will bust threw thick wing bones no problem causing less crips. I use BB's in areas I know I will be shooting within 35 yards. Amazing that people openly admit on a forum to shooting a shotgun at waterfowl at 80 yards with any type of load. I hope other hunters don't think that is ok. Keep it within 45 yards. 50 is acceptable with 3.5 if you're an accurate shot. I rarely shoot past 40. It keeps the ducks in the swamp providing better hunting for everyone. Too many cripples are lost, kids don't taught the proper ethics, and its brings a negative image to the passion we all share. Excessive skybusting should be a fine in my opinion. I've seen parties cripple twice the amount of ducks they end up bagging. It is a waste of a resource and a disrespect to sport we are lucky to have.

Link to comment
Share on other sites

Several years back I took a group to a patterning session to PROVE to them that their T-shot was [PoorWordUsage]. When the actually SAW the patterns they were shooting they quickly switched. If we want people to accept us as "sportsmen" we need to respect the prey. Make clean kills. Shooting at birds out of range is poor practice. Last fall I talked with a group who proudly told me they had taken 19 ducks that morning. Then one of them said "yeah, we actually shot 38 but some were just crippled and we couldn't get to them in the swamp."

Ain't that just dandy?

Link to comment
Share on other sites

Found this an interesting read and don't doubt it. I used #4 buckshot in the 80's for geese, it stopped em in their tracks, but the limit was 1 bird. When steel came along copper plated federal T shot with great success. Now we use Remington T shot in our 3 1/2 870's with no problems as of yet. The key is they need to be in range and if you know how to lead them you'll be fine with most loads. Cousin uses a browning with 3 1/2 federals and he stones em. Know your gun, practice with it a lot, and pattern it, mine patterned fine with T's, and only fire in range.

Link to comment
Share on other sites

I shoot a lot of T's late in the year. The best all around load over decoys and even longer shots has been #1's. I shoot a SP10 and a Super X2. If you have never shot 1's, give them a try. Trust me you will not be disappointed.

Also remember, Speed kills. 1500-1550 seems to be the best for me. All shot out of a Pattern Master choke tube.

Link to comment
Share on other sites

I shoot a lot of T's late in the year. The best all around load over decoys and even longer shots has been #1's. I shoot a SP10 and a Super X2. If you have never shot 1's, give them a try. Trust me you will not be disappointed.

Also remember, Speed kills. 1500-1550 seems to be the best for me. All shot out of a Pattern Master choke tube.

the notion that speed kills is starting to become debunked. faster starting pellets slow down faster, and in many instances will be traveling the same speed as slower pellets at 40 yards. if i can find the link to the published info on this i will post it but i believe it was in wildfowl magazine....

if you are decoying birds, pattern density and knowing how to lead are paramount over shot size any day of the week. sunday we shot 19 honkers here in sodak, and i shot 3 of my 5 birds with 2 3/4" 1 1/8" oz federal 6's out of a briley straight rifled waterfowl choke. throws a great pattern and when the birds are feet down in the deeks thats all you need!

Link to comment
Share on other sites

Quote:
the notion that speed kills is starting to become debunked. faster starting pellets slow down faster, and in many instances will be traveling the same speed as slower pellets at 40 yards. if i can find the link to the published info on this i will post it but i believe it was in wildfowl magazine....

I would agree if were over 1550 shot. If you are shooting over decoys, almost any shot will work as long as you know your range and lead. Less lead= more speed. I still shoot everything from 1350-1550 and still prefer 1550 IMO.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Your Responses - Share & Have Fun :)

    • Yeah it was a beatdown
    • Your kid needs to stay with him!👍
    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.