Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Plowing your way out


NWBuck

Recommended Posts

I'm giving some thought to buying a snow blade for my pickup. Primarily for personal residential use, but I thought another way to justify the expense would be to plow my way to ice fishing spots when there's plenty of ice but too much snow for truck travel. I don't have a snowmobile, so this would give me the ability to reach places that many times I can't. Obviously, I'm only talking about the local lakes, as I can't see wanting to drive on a long fishing trip with a blade on the front. Anyone do this? Hearing your experience would be valuable...thanks.

Link to comment
Share on other sites

I can hear where you are coming from. I bought a plow 14 years ago, yes there are many years I didn't need it, but nice to have when I did. Keep in mind that plowing on lakes is tough on plows and trucks, the driffs are bigger and harder.

I live on the lake that I do most of my fishing on. I would plow from my shore to the fish house, well I had people driving out of my yard at all hours of the night and day. So I stopped that and plowed from the access and had so many people aroud my house I couldn't get to it. With that many people and all the snow it caused flooding. You can't stop them from using the road, but many didn't want to give me anything for plowing, some did. You would be surpized how much fuel can burn in a day. I have gotten a good talking to by some about where I plowed roads, they thought they were in the wrong places. Then there people that thought it was fine that they would drill holes in the road to fish. I won't even get into the arugments that caused.

So with all that, being that I like to fish off by myself away from people. I am getting a atv with tracks on it and I am making skis to put under the wheels of the house. This way I can get where I want to go, anytime and no roads. I will more than likly will put a plow on the new truck that is coming, but I done plowing on the lake unless I really have to.

Link to comment
Share on other sites

I have plowed roads on the lakes I fish, it's a great way to make friends.

this year is tough going if the road hasn't been established early, drifts and the frozen snow are tough on equipment.

There are some (a-holes) that think because the road goes to your fishhouse, it's ok to use your fishhouse or set up their portable as close to yours as possible (had guys drilling holes inches away from my house). wasn't a huge problem, just something that bothered me.

and

I was advised, by an attorney fisherman, to place a sign at the beginning of the road stating "ice conditions on the lake are not guaranteed safe for vehicle traffic, The person plowing this road assumes no responsibility for your safety or the safety of your equipement". I never did place the sign, figured if someone went through on the road they would have to prove i plowed it.

I've only fished that lake a few times this year, but it's not far from my house, so i ran out and plowed a road a few weeks ago out to their shack city.

it all depends on how much traffic the lake sees. plowing roads on the more populated lakes is going to be a real pain if you only plow to your house.

Link to comment
Share on other sites

If I had the money to invest in a plow for my truck, I would get one. I wouldn't hesitate plowing roads out on the lake for my use as well as for others. I enjoy helping other people any time that I can. Plowing roads for other people to be able to go out fishing with their children would makes perfect sense to me. As far as "Plow it and they will come", that is why I would be plowing it. To see many families out having a good time with their family,(and,or) friends.

Link to comment
Share on other sites

I wouldn't mind the repairs knowing that I am helping someone being able to take there children,or friends fishing. I would be doing all of the repairs myself anyway. I just like to see people having fun. That is just the type of person that I am. I just remember a time I went fishing, and watched a gentlman with a plow on his truck. He hauled his wheelhouse onto the lake without even dropping the plow to get out to where he wanted to fish. When they were done for the day, the proceeded to the landing they came on. Unfortunately when they got to the landing, by not plowing it out the first time, the ruts got covered with hard drift snow, and they got stuck. When they did get out, the landing was in sh** condition, and unusable because of one man's ignorance.

Link to comment
Share on other sites

using a v-plow will reduce the stress on truck and plow when trying to open a road late in season.maybe plow an extra area off to side, or well past you , of your shack will reduce the poeple next to you. dont leave them room to camp next to you.

Link to comment
Share on other sites

i would like to find an older plow for my old truck (30yrs) that i would use to plow a road out on to the lake that i live on.

if not that i would/ am looking at getting a plow for my rhino that i would use. just have to get out there right away before the snow gets hard

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.