Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Fishing mn Markers


WalleyeSnob

Recommended Posts

i wanted to purpose the idea of having some kind of marker that we fishing mn'ers can put on our houses while ice fishing that way we can stop by and say hi and exchange some reports or ideas
especially out on the big lakes like lake of the woods or mille lacs
i ran into scoots today on LOW and we were just talking and i asked him about fishing mn so we put two and two together
and what do you know another fishing mn resident
does anyone else think this is a good idea because i feel that there are literally thousands of us who pay attention and are apart of these message boards it would really be nice to put some names with faces

tell me what you think or any ideas of what kind of marking we could use to tell eachother apart from any other angler

let's get a count of how many people would be up for this

I am in!

Link to comment
Share on other sites

Good idea. Maybe a bumpersticker or something similar that would say FishingMinnesota.com boldly with a spot we could write our username in with permanent marker?? It is fun to run into a FMer out there, i have done it myself.

------------------
"Fishing is a condition of the mind in which one cannot possibly have a bad time."
idratherbefishing

Link to comment
Share on other sites

How about a small banner or flag? Something in a bright orange so it can be seen from a ways? Also how about having a designated 2 way radio channel? Maybe 6/13? 6 for F and 13 for M ? This way at all the Ice Leaders and other get togethers we know where everyones at on the radios.

Link to comment
Share on other sites

I have Ice Leaders "bumper stickers"...
http://fishingminnesota.com/ubb/Forum30/HTML/003084-2.html

One of my "jobs" this week is to find a flag that will designate I.C.E. Series participants for the tournaments. I am looking for sonething bright that can be seen at a distance... that I can put FishingMinnesota.com / I.C.E. Leaders on.
I'll post you on my results.
Catch'n
Dave Hogard

------------------
Fishermen are catch-n on
Catch'n Tackle
For Bass, Walleye, Pike, Lakers, Trout, Panfish
Used by FishingMN Family

Link to comment
Share on other sites

OR what about just haveing a sticker or paint on your house "FM" or "FM'er" or like someone said "Fishing Minnesota". Id be up for that!
I like the flag idea too.

------------------
Fish ON!

Link to comment
Share on other sites

You see those flags with pro football team logos on them that hook on vehicle windows, that would also be a cool thing for a FM logo, maybe in bright chartruse?

------------------
"Fishing is a condition of the mind in which one cannot possibly have a bad time."
idratherbefishing

Link to comment
Share on other sites

I have my own logo on my house, I would like a larger size bumper sticker. Flags dont last on my house on LOW in those super windy nights. If you see my logo on my house com'on in!

------------------
End of the Line Charters
Lake Superior
1-888-U-HOOK-EM
www.fishontheline.com

Link to comment
Share on other sites

Coach Dog - I used to fish the south central lakes around the mankato area. But I found that there are so many lakes around the metro area that I am going to go out and try my luck around here, especially since I live here smile.gif

so needless to say I am a rookie to the metro waters. But will be out often. Will be going up to Mille Lacs a few times and may venture up to LOTW.

I have been looking at getting some sort of reflective paint to paint something on my shak so people know its me.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.