Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Mickey Mouse Boots?


Bob Horn

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

For the money they're the best boots you can buy. I purchased mine about ten years ago at the Sportsmans Guide in So St Paul. I think they cost me $20. I use them every year for deer hunting and all the time for ice fishing. It doesn't matter how cold it is, my feet sweat all day long. When I get done wearing them for a day, I pour the sweat out of them. Gross, but my feet stay warm. Connely's Army Surplus in Rochester also carries them, but they're about 5 times as much as the Sportsmans Guide.

[This message has been edited by protiller (edited 11-20-2003).]

Link to comment
Share on other sites

Yup, with a pair of Real Mickey Mouse Boots and bulky all wools socks your all set.

I recommend you get 1 size larger and a wider width if you can. You get better heat retention and less sweating that way. You want room to wiggle them toes. They fit snugly around the ankle so they will not slop around when walking if you go larger.

Wool socks are key with Mickey Boots, I can't reinforce that need enough. NEVER cotton socks!

Carry a extra set so if your feet get wet you can change them. The socks are the only thing that gets wet. The Mickeys absorb no water so the inside will dry in minutes. The swapped out set of wool socks can air dry even in freezing weather. If wool bothers you wear a Seal Skin sock liner under the wool socks and you will not have problems.

I have had a set of Mickeys for at lest 15 years. I think I finally managed to were them out last season. So I am looking at getting a new set soon for myself. I will be looking at Sportsman's Supply or Calvary Surplus as the source to get them.

------------------
BACKWATER GUIDING
701-281-2300
[email protected]
><,sUMo,>

[This message has been edited by Backwater Eddy (edited 11-21-2003).]

Link to comment
Share on other sites

Eddy I put a bulky wool sock on and I'm gonna have a a case of athletes foot so bad it won't go away for months, allergic here to wool. I wear just a thin polypropolene sock that's well over the calf and then a pair of white cotton crew socks basically the cotton soaks up perspiration, it's funny at the end of the day sometimes when you take em off your toes are wrinkled like you been in the water to long.. These boots are so comfortably warm that I have never had to tie them I leave the tungs wide open. Incredible the design it really is. I placed stainless 1/4" heg head self tapping screws in the bottom of them since there my permanent ice sboot. Make sure you soap the screws before you zip em in they' go in easier. Well after a full ice season this past spring, I lost only 1 screw out of about 60. The only thing I did to store them was washed well inside and out with soap and warm water, air dry, and then I wiped a rubber protectant all over it tossed em in a trash bag and sealed em up. I just pulled em out the other day and they look great....

Link to comment
Share on other sites

Darn right these are the best boots ever!
I absoultly love to wear them all time if working outside in the fall/winter/spring. They work really good in muddy conditions too.
Just wear a wool sock and ur set. The best part is if your feet get cold run warm water into the boot. Since it only absorbs heat they will warm right up! And all you have to do is whipe out the left over water on the inside and ur set with warm feet again.
Great boots!

------------------
Fish ON!

Link to comment
Share on other sites

Check out hsolist. They always have them on there and the price is right. Make sure you are getting the real ones, not the immitations. I just replaced my 10 year old ones this year off hsolist. Like ED says, get one size bigger then the shoe you wear.

------------------
Mille Lacs Guide Service
www.millelacsguideservice.com

Link to comment
Share on other sites

Do y'all wear the white ones or the black ones? As I recall, the white ones are the "extreme cold weather boot" while the black are the "cold weather boot" according to the military. BTW, they're $60 and $40 respectively on sportsmansguide dot com.

Match

Link to comment
Share on other sites

I have the black mickey's boots. I also have a pair of Lacrosse Ice Kings and there a good boot too and I believe a touch lighter than the mickies. I just didn't like dealing with the liners all the time. My feet sweat pretty good so after a day they would be pretty wet inside so you have to pull the liners out put em by the heater and then back into the boot after every single trip. It's a pain in the but I guess I could just get an etra set of liners, any how with the mickeys I just take em off when I'm dine fishing throw em in the back of my van until I go out the next day and there always dry the next day I put my feet in em. As far as the sizing goes I am a size 12 in regular sneakers and work boots but in Mickeys an 11XW was the perfect size for me. My buddy wears a 10.5 regular sneaker/boot and he has a size 10XW Cabelas Mickey. If you can try em on the better.

Link to comment
Share on other sites

One way there better is what I mentioned. The felt cant get wet from your foots perpetration. Water in any insulation is bad. Even in a couple hours of use the felts insulating qualities are greatly reduced from sweat.
Our military uses MMs just for that reason. Now imagine yourself on a winter camping trip and you step into a hole with Iceman's. Your going to have wet feet the rest of the trip. Theres not many opportunities to dry out wet liners in winter camp.
What I don't like about the MM's are the tread design. If they could make them with the soft rubber buttons like my Sorel Dominator's it would be a great improvement.

Link to comment
Share on other sites

The real military white and the black Mickeys are the same thing, just that white is a winter camo application. My last set happened to be whites because I was predator calling in the winter back then.

If wool is a problem try a sock called Smart Wool and add the polypropylene sock liner. A smart system that the long distance dog sledders use and sear by. It pulls moisture away from your skin to the sock where it can be evaporated away. Moisture is your enemy in deep cold.

------------------
BACKWATER GUIDING
701-281-2300
[email protected]
><,sUMo,>

[This message has been edited by Backwater Eddy (edited 11-21-2003).]

Link to comment
Share on other sites

i've got something different. I bought my ice kings right in lacrosse at the factory outlet store, and I don't have felt liners. They are something else, not sure how to describe. but I don't have a problem with them. And as for stepping in a hole, if you should be so unfortunate, the are water proof, so the liner shouldn't get wet.

Link to comment
Share on other sites

Thanks for all the replies. I just placed an order with Sportsmans they should be here at the end of next week. I ordered black because the white is on back order until Dec. 24th. I heard there is`nt any difference in them other than color. Thank you once again. Fish On

Link to comment
Share on other sites

Hogeye,

I am in the US Army Infantry and we do a lot of road marches. If you don't take care of your feet you will be in a world of hurt while on these marches. The trick of using anti-perspirant on your feet to reduce sweating does work. First of all, you must make sure that you are using a product that is completely anti-perspirant and not a combination of anti-perspirant and deodorant. Next you should start this process approximately two weeks ahead of the time you are shooting for. Basically you just spray your feet about twice a day. Once in the morning and once before going to bed. Also make sure you put a sock on once you spray your feet in order to hold the anti-perspirant on your feet.

IceMan

Link to comment
Share on other sites

Sportmans has them for around $60. for black and a extra $20. for white. Cabelas does`nt have that many sizes but Sportsman (do a search for micky mouse boots) had a ton. I don`t need them for hunting just ice fishing so I went with black. Fish On

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.