Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

HT lights


Reservoir Dawg

Recommended Posts

I bought a 25 light LED light made by HT from Fleet Farm. I put four rechargeable AA batteries in and lit it up at first I was very impressed but then the LED lights began to burn out after a few hours of use.Some of the lights actually exploded narrowly missing my eye.

I exchanged the first light I bought only to have the same thing happen. Has anyone else had this expirence ? Should a person not use rechargeable batteries in an LED light ?

Link to comment
Share on other sites

I've got the second light right in front of me I tested it in my office, after a couple hours the lights started burning out. This light has four lights in the middle and 21 around the outside.The four lights in the middle still light but there are only two on the outside still working and two exploded. On this light you push a button once and the four middle lights come on,twice and the outer lights come on, and three times all the lights come on.

Link to comment
Share on other sites

As metrojoe stated, rechargable batteries put out a slightly lower Voltage than do non-rechargable. The problem with that in this case is with the lower voltage, the amperage is increased to overcome the resistance. I am guessing that the LED lights in the HT light can not handle the amperage that is being used to power them at the lower voltage. Thats just my two sense.

Link to comment
Share on other sites

Thanks, I took the back cover off and under the battery it says 1.5v and if I look at the rechargeable battery it says 1.2v. I actually measured the battery with a multimeter and they measured 1.3v

I also have the 48LED light from Northern at it works fine with the same batteries.

Dumb question, but doesn't the voltage drop on a regular battery as its used.

Link to comment
Share on other sites

No it doesn't because the way that the batteries are connected, they are connected in parallel and in a parallel circuit voltage stays the same throughout. What changes is the amperage... long story short, you would probablly do yourself good just getting some disposable. Speaking of that, Home Depot has a pack of 36 duracel AA on sale right now for 12 bucks. Just a thought

Link to comment
Share on other sites

You are correct. When regular batteries start to die the weakest in the parallel chain will draw the others down so when the batts get old eventually you will hit 1.2 volts with regular batteries and the higher current would do the same thing.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.