Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

flip over house floors


bijou bum

Recommended Posts

This was talked about a little bit ago, some use vehicle floor mats, carpet, etc. I have this portable/folding camping table (the top is made out of wooden strips with bungee cords through both ends, making it rollable) that I use in my shack to set the Vex/AquaView/beer on. I was thinking of making something like that, bigger, more durable, for the floor. It would give your shack that hardwood floor look grin.gif plus it would keep your feet off the floor. If I get that done soon, I will post it. If only I was a little more handy.

Link to comment
Share on other sites

I just made a "deck" for my otter. I had old 1x6 cedar and made two sections 1' wide by the length of the sled, for a total of 2' deck. I hinged it together with rope so the total thickness when folded is 2.25" and it fits in the sled nicely. I also put a few sheet metal screws in the bottom for traction on bare ice. No pictures yet but I will when I hit the ice.

Link to comment
Share on other sites

I bought some anti fatigue mats at Menards that are probably made of some kind of rubber compound and about the size of a door mat. They are black, full of holes and about 1/2" thick. They don't freeze down and I haven't had cold feet since I bought them. About $3.50 apiece.

Link to comment
Share on other sites

i as well got some cheap mats from fleet farm that i cut out a few holes in for the ice hole then i just lay it down when i get to my spot it is rubber backed so it doesnt stick to the ice and has carpet on top for the marcum and aqua vu to sit on:)

Later,

Ryan

Link to comment
Share on other sites

I found a pack of 12x12 1/2 inch thick rubber/foam squares that link together like a jigsaw puzzle at an auto store, pretty slick. Probably 12 squares in the pack.

Let's me configure them around the holes I have drilled, leaving an open "piece" where I have a hole. They're black so they help deflect a little of the lost heat off the ice. Not great in snow as Northlander said, but nice atop of pure ice.

Cheap too, maybe $15? Don't use if I'm moving around a lot, but if I set up on a spot I love 'em.

Chris

Link to comment
Share on other sites

A couple people have mentioned this already and this is what I use, that is the anti-fatigue mats available at Menards.

I picked these mats up about 3 years and the idea has been spreading like wildfire. grin.gif

I really like them on bare ice, it keeps your boots off the ice which does keep your feet warmer and dry. In deeper snow, you can pack them down and get a pretty stable platform under you when the snow is deep.

When you aren't using them, toss them into the sled.

rubbermat3zg.jpg

Link to comment
Share on other sites

I have checked into these "anti-fatigue" mats and found they come in 4'x4' only now (or at least at Elk River Menards). They did not know about the small square one like you have Hanson (at least the clerk I was talking to).

I figure for $19.00, one could cut out size he/she needs and be good to go.

Anyone else know where you can get the smaller sized ones Hanson has in his image?

Link to comment
Share on other sites

I "borrowed" the kids foam squares that lock together at the edges that are around 2' x 2' for the feet in the flip-over. Very colorful and looks like a carnival tent on the floor, but you can't miss 'em in the dark! They can blow away if you're not careful. I think you can also find them at the HD in a four-pak.

-Prudence

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.