Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

What is your Best Tip-Up & Rod and Reel set-up for Northerns???


Bob333

Recommended Posts

Hello Anglers,,,I am a wondering what are the Best methods of fishing for Northerns thru the ice using a Tip-Up and a Rod & Reel...What kind of bait, live or dead. Line, leader set up, dept of water, minnows...What are your best ways of setting up. And being in stain waters...I am alittle new at Northerns and I can use your information this year... I Thank-You, for your information...

Link to comment
Share on other sites

A quick-strike rig of some sort under the tip-ups. In Minnesota, to have multiple hooks or a treble hook you need to have a 'lure' of some sort...it can't be a plain hook (or hooks). You will get some discussion, but usually a medium-sized spinner blade and a bead or two will suffice. You can get pre-made quick strike rigs at any decent sporting goods store.

Under a rod and reel, you can jig for them...use a jigging spoon of some sort tipped with a minnow or dead smelt. You will get a variation of opinions regarding the kind of jigging spoon to use, but I have always like using Mepps Cyclops for jigging northerns.

Just a couple general ideas off the top of my head...

Link to comment
Share on other sites

I have mostly just started fishing for northerns through the ice in the last couple years and have used both tip-ups and jigging, and it is a ton of fun.

I also like quick strike rigs under tip ups. I think I usually use ones with about size 4 or 6 treble hooks with about 4-8" suckers or shiners.

When jigging I use about a mh jig rod that is 28". I would maybe go longer, but sometimes I sight fish for pike and it would be about impossible with a longer rod. I use a slightly larger reel than usually used for ice fishing, and I put 14 fireline on it with a steel leader.

For jigging lures, my favorite are 1/2 oz northland bucktail airplane jigs. I also like jigging raps and chubby darters, and I am sure spoons would work well to. I have also had a bunch of pike come in on rattle traps. However, when pike are slower big panfish lures would probably work best. I would say to be creative with lures, sometimes I think the pike are just curious. Sometimes I have seen pike hit about everything you lower into the hole, but other times they will come in and only stare down your lure before leaving or just nip at your lure.

For locations I usually will start around the same areas I would be looking for panfish, and I would also recomend to keep moving, many times I have seen pike fly in as soon as I lower my lure into the water.

By the way if you can find a nice clear lake, sight fishing for pike I would say is about as fun as it gets when a big pike comes in.

Link to comment
Share on other sites

I just use simple Polar HT tip-ups and tie two small jingle bells to each flag so I have sound as well as sight to tell me I've got a flag. I also use the circular soft foam hole covers to make things easier.

My line is 50 lb Fireline tied directly to quick-strike rigs I tie myself with a couple heavy split shot just above the rig to keep those frozen baits from occasionally floating. With a quick-strike rig you set the hook as soon as you get to the tip-up, which means virtually all fish are hooked shallow because they haven't had time to swallow the bait. Pike are not hook shy, and shallow hooking makes it much easier to release them unharmed. With a growing number of lakes with slot limits in Minnesota, that's a big consideration.

My bait of choice is dead smelt, cisco or herring, depending on what part of the country is being fished. Live suckers are very popular and are good bait, but I've found in the last 10 years that dead bait outfishes live bait for me at least 2-1, and sometimes 3- or 4-1, so I leave the live bait behind. Active, neutral and even negative fish will hit a deadbait, though it takes a long time sometimes for a neutral or negative pike to stare down a bait before sucking it in. Live suckers or other bait will attract all the active pike, but neutral pike don't snap it up that often, and there's just too much wiggling for negative pike.

Far less hassle with deadbait, too. Dipping into a freezing minnow bucket to grab a live sucker isn't a lot of fun on a cold windy day even with a bait net, and you've also gotta worry about that bait bucket freezing. With frozen smelt/cisco/herring, it's easy as can be.

I position one bait about half way up the water column and the other about a foot or two off the bottom. Best day by myself with two tip-ups rigged this way was 29 flags and 15 fish landed.

That's the way I do it, but there are lots of different ways that work to fish pike. grin.gif

Link to comment
Share on other sites

Dead vs Live is a very interesting discussion when we are talking baits for pike under the ice.

I'm sort of in the middle with a slight preference towards deadbaits.

Live Golden Shiners and Sucker minnows do work great. Dead Smelt, dead herring, and dead cisco work very well too.

What I like to do is fish live baits early in the year (now) and fish dead baits later in the year (late ice).

What starts to happen throughout winter is fish die and eventually float towards the surface. Some of these fish die for natural reasons but alot are due to mishandling by anglers. Pike will adapt to this as they know they can cruise under the ice and have easy pickings of dead, dying, or wounded fish right under the ice.

I had read a very interesting article many years ago about a group of anglers fishing with tip-ups & deadbait right under the ice in 30' of water on Lake of the Woods and doing very well for pike, and big pike at that. They were fishing near some very popular reefs where there were large concentrations of fisherman. Small walleye and sauger were being caught 30' down and had a hard time being released due to the expansion of their air bladders. The pike had learned this was a very easy meal which kept accumulating directly under the ice. Easy meal!

There are a number of valid topics when discussing tip-ups for pike: location, depth, and bait selection. Get all 3 right and its magic!!

Link to comment
Share on other sites

The lake i do most of my pike fishing on seems to be loaded with hammerhandles. Seems like most of the lakes in my area are. Would smelt be too big for the smaller pike or would they be ok? I would say the average pike i catch on this lake are anywhere from 18-21 inches or so with an occasional fish going about 25. Ive caught one at 30" and had a guy i was fishing with get a 37" out of there once so there are a few nice ones in there.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.