Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Fallin Through


BarryG

Recommended Posts

What do they do when a truck or car goes through the ice? Are they able to get it out before it sinks or does it go down like a rock? I come to this board every day and was wondering about that. Some day I will make it up north for the hard water fishing.

Link to comment
Share on other sites

My stepbrother dropped his through on the lowner end of Clam Lake near Siren about 3 years ago. The front end on one side of his dropped in....course when the wrecker came and pulled it broke the ice and the whole truck went down in about 5 feet of water. The insurance company totalled the truck. It got pretty banged up when they dragged it out from the ice hittin the sides.

I have seen others where the front or rear drops in but not yet seen where they go down altogther.

Link to comment
Share on other sites

The pickup I saw dropped through the ice on LOW and went all the way to the bottom of the lake in 16' of water. They put up a large tripod over the hole in the ice and winched it up. When the pickup came out of the water the temp was about 0 degrees, and the truck steemed like a wet new born calf dropped in the snow. Not a pretty sight.

Link to comment
Share on other sites

When it's deep, one can hier a scuba diver who will go down and insert inflatable rubber bags into the cab or under the vehicle and float it up. Learned that when I got SCUBA cerified. Anyone else certified? It would be fun to go, but I don't know many who are certified.

Link to comment
Share on other sites

I have heard of a large, flat sled that they slide down the hole created by the vehicle, then a diver goes down to hook the truck to the sled and the wrecker pulls the whole works back up. Supposidly they do less damage to the vehicle this way and it is safer for the people doing the recovery.
Lets hope nobody here ever has to find out first hand.

------------------
Born to Fish, Forced to Work!

Link to comment
Share on other sites

About $1,500 on the very cheap end, usually about $3,500 - $4,500 though for a standard recovery in less than 20' of water. Seen it done too many times. Tripods, large wooden or metal skids and a wrecker, tubes, cables & winches, etc. Yup, usually not a fun process and of course you alway's attract a crowd of gawkers! Some insurance companies will cover the recovery and vehicle loss and others won't. Sometimes there can be a ticket issued or fines associated with "going through". Getting them out in a timely matter is usaully very important but safety is most critical, hope this helps.

Link to comment
Share on other sites

Last year Ron shara's brother dropped a truck through on Koronis in ~ 80 or so feet of water. A school dive team went down and lifted it w/ barrels charaged with air. They had it in the local paper out there. You also get fined for having your vehicle going in. That all depends on your county if I remember right. And it works like a tow service. The longer it's in the more you'll owe.

Link to comment
Share on other sites

You do need a rider on your policy for ice coverage and vehicle recovery. Do not assume it is covered, that can get very expensive.

Average cost of recovery is $5000, and can hit as much as $15.ooo........UF DA.

------------------
Ed "Backwater Eddy" Carlson..><sUMo>

Backwater Guiding
"Ed on the RED"
(701)-281-2300

[email protected]

http://ed-carlson.fishingbuddy.com

Link to comment
Share on other sites

Backwater Ed Im fairly new to this site and never was good at scherades but if I read your abreviation right(you f----- dumm as-)it could happen to any of us!haha!Sorry had to make lite of a bad situation!Ive heard lots of stories on price but luckily havent found out yet myself!Ive heard some insurance companys cover it for the first time but not twice.Also talke with my insurance man who also fishes and said his company doesn't have a rider for that so you may be on your own!

------------------
cal

Link to comment
Share on other sites

The loss of your vehicle going through the ice is covered under comp coverage on your auto policy. No rider is needed other than your comp which also covers you for wind, hail, fire, theft, malicious mischief/vandalism, collision with an animal and glass. No where in the policies that I've sold for 17 years does it state ?Plowed or maintained Roads." We've totalled two in that time, both drivers escaped. Our claims office works with EPA as there are some strict laws regarding the loss of engine fluids into a body of water. Hope this answer some questions. Stay safe, and good luck. Bill

Link to comment
Share on other sites

Cal

Humorous interpretation, but uf da isn't an internet abreviation like LOL or ROTFLMAO. It's a "How to speak Minnesotan" expression of Norwegian origin. Pronounced oof dah. Widely used for various situations, loosely interpretted as OH MY.

I see you're from Iowa. Many Iowans who have much contact with speakers of "Native Minnesoootan" would be familiar with this expression. If you already knew this and were just yankin' bwEd's chain, then ya got me too. Anyhow good one Cal, it made me chuckle.

Link to comment
Share on other sites

LOL
I think a lot of times it has both definintions! smile.gif
I have seen many fathers say that to their son when they brought the car home all srcewed up.

[This message has been edited by fishhead (edited 12-17-2002).]

Link to comment
Share on other sites

Fishead
I'm LMAO.
Ya just gave me a glimpse of the future when my sons become old enough to drive.
I can just see myself shakin' my head and muttering. UF DA this car is FUBAR.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.