Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Minn Kota PD Foot Fedal Problems


Musky_Madness

Question

While fishing last week up in Detroit Lakes, my foot pedal died for my Minn Kota. It is a current PD model before the V2 edition. The speed, momentarily and constant all work but direction changes are out. You can tap any corner and it does nothing. At first it would not turn to the right and the left still worked and then the left stopped working too. I'm assuming it's a dirty contact issue in the pedal, but how do we clean it out properly? My dad a blew it out with the air compressor but that did nothing. Any similar problems or tips?

Link to comment
Share on other sites

9 answers to this question

Recommended Posts

  • 0

Do yourself a favor and get the co-pilot for it. I just got mine and love it. I hang the hand control around my kneck, it drives me nuts on a rod or my wrist.

Im thinking about the cordless foot pedal now as well. The corded foot pedals are always breaking down, getting dirty etc.

No matter what you do call Jay Soderbloom and see what he has for prices on what you need. I got my Co-pilot from him and saved $ over any place else I could find. www.soderbloom.com

Link to comment
Share on other sites

  • 0

On the bottom there are two springs. Take these off it comes apart to clean. Also clean the contacts where the cord plugs in to the motor. I've had mine act up because there was some corrosion there. It's easy to do.

Link to comment
Share on other sites

  • 0

Its not always the pedal, I had this issue where it would not turn left. I took the pedal apart and cleaned the contacts and it still didnt work. So I then took a wire brush and cleaned the male ends of the plug in to the motor and it worked. Something to try before you buy new.

How do you guys fight a big fish and steer with a remote? Or how do you change direction when casting for muskies? You dont want to stop your retrieve, but you dont want to run into some rocks in the wind.

Link to comment
Share on other sites

  • 0

I had this problem earlier in the year and went for the Copilot. After using it about 5 minutes, mounted on my baitcaster, in front of my reel, and facing the left side I can make adjustments during my cast, my retrieve, and even during a fight with my pointer finger.

I still have my footpedal as a backup. Even had to use it once because I left my remote on another rod at home. I never realized how much dancing I did in the front of the boat before the copilot.

I'm sure there are others that haven't had as good of experience, but I really like it and it takes care of the sand, dirt, and grime that can take it's toll on the footpedal.

Mike Wallace

Link to comment
Share on other sites

  • 0

Had it happen to me as well, then bought a new pedal (can't rember the cost). 2 weeks ago, fishing with my son, I asked him to raise the trolling motor so we could move to the next spot. Unfortunatley it didn't latch and the trolling motor slammed down and snapped (accidents happen).

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.