Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Trolling motor advice

MNFisherman06

By MNFisherman06
in Open Water

 Share

Recommended Posts

MNFisherman06 Rookie

MNFisherman06

Posted
Posted

I'm looking for some advice on a trolling motor. I'm upgrading my trolling motor from a 50 lb cable driven to a 70 lb minn kota PD. I own a 17 ft Tracker Targa. Options that I am considering:

1. Shaft length: 54" with universal sonar

60" with universal sonar - extra $50)

2. Universal Soar: extra $80 + $20 for adapter and I already have own the transducer for my other TM

3. Auto Pilot: there is 65 lb unit with US/AP 54" shaft - extra $70

Any advice would be greatly appreciated. My primary concern is the shaft length. 60" seems huge, but my 48" comes out of the water all the time on windy days. The wife game me the OK and I don't want to screw it up. The wife's consent on a fishing purchase doesn't come along too often so there's a lot of pressure to get it right.

Link to comment
Share on other sites
PerchJerker Grand Master

PerchJerker

Posted
Posted

On an aluminum boat I would definately go with a 60" shaft. I have a 54" shaft on my glass boat but the bow sits lower to the water and doesn't come up as high as on an aluminum boat. I had 60" shafts on my aluminum boats.

If you already own the transducer and it's in good shape, I see no reason to get the universal sonar. If you didn't have the transducer, or if it needs to be replaced, then I would go universal sonar.

AutoPilot - that's up to you, and how you use the motor. I used to have it, haven't got it on my last few motors. I might get it on my next one, you never know.

Good luck.

Link to comment
Share on other sites
yar 32 Contributor

yar 32

Posted
Posted

I would go with or own transducer the universal doesn't give the target separation and bottom detail that the external can provide. I have the universal and choose the external for above reason's save the money and get the longer shaft you will like it a lot more. Just my 2 cents

Link to comment
Share on other sites
MNFisherman06 Rookie

MNFisherman06

Posted
  • Author
Posted

Thanks for the replies. I leaning heavily towards ordering the 60" shaft without the transducer.

I do have one more question and that with the way Minn Kota stows away, what's the best way to run your transducer cord? I'm probably making this harder than it needs to be, but when you stow the mounting bracket slides the whole length of the shaft down to the power head. I don't see how you can tape your xducer cord to the shaft and be able to stow it. Is there something I am missing?

Thanks

Link to comment
Share on other sites
croixeyes Rising Star

croixeyes

Posted
Posted

That would be a little tricky.Ive got a Mnkta Maxim so that isnt an issue.Its definately something to consider.Ive got a glass boat and as mentioned above the longer shaft is a good idea.Keeping the motor in the water is important.Maybe someone who has this set up your looking at will chime in.

Link to comment
Share on other sites
Sandmannd Grand Master

Sandmannd

Posted
Posted

You might wanna look at the co-pilot as well. I got one this year and it's awesome. Controlling the boat with a remote anywhere in the boat rocks. I have the remote mounts on three rods so it goes with me when I change out rods.

Link to comment
Share on other sites
carlcmc Proficient

carlcmc

Posted
Posted

i second the copilot and autopilot. I wear the copilot around my neck. I have a 20' pontoon and I can walk around helping the kids and still control the boat. I leave the autopilot on most of the time and set the heading at the autopilot will automatically adjust to keep you pointed that direction. very handy.

Link to comment
Share on other sites
UMDSportsman Community Regular

UMDSportsman

Posted
Posted

I would second the auto-pilot and co-pilot. I don't own my own boat yet, but my father has a 21' sylvan that he keeps at our cabin on winnie. He has the auto-pilot and in the past year or two put on the co-pilot and it helps a ton. Being able to fish in the back and control the boat with remote is awsome. Last year on opener my dad and i were the only ones that wanted to go out on opener. We had the cover over the front (arround trolling motor) and the canopy up fishing in rollers probably somewhere around 3-4ft and we could control the boat with a little remote that clips to your rod, really nice.

Link to comment
Share on other sites
unfrozen Rising Star

unfrozen

Posted
Posted

I've had the auto-pilot for several years. When it works, it's nice. However...most times after a few minutes of use the dang thing begins quickly rotating the motor on it own, sending the boat in a different direction, and I have to disable it. EXTREMELY frustrating. After it began happening the first year, I drove it down to Mankato and they did some work on it...swapped out the eletronic board I think. They also suggested that perhaps it wasn't getting full power from the battery. Whatever the cause it's still doing it to this day.

Maybe the newer units perform better but I wonder if anyone else has experienced these problems. Just be aware and ask questions.

Link to comment
Share on other sites
bubs Contributor

bubs

Posted
Posted

I would go with the 60" that is what I have on an older crestliner and it works great. I never have a problem in waves the motor never comes out of the water, just be carefull in shallow and big waves.

Link to comment
Share on other sites
mnfishman Enthusiast

mnfishman

Posted
Posted

Quote:

I do have one more question and that with the way Minn Kota stows away, what's the best way to run your transducer cord? I'm probably making this harder than it needs to be, but when you stow the mounting bracket slides the whole length of the shaft down to the power head. I don't see how you can tape your xducer cord to the shaft and be able to stow it. Is there something I am missing?

Thanks

That is the main reason why I bought the MinnKota Max with universal sonar. I know on the maximum's there isn't as much of an issue with the transducer cable taped to the shaft but the way the PowerDrives stow it may be an issue.

Most of the PowerDrives that I have seen the transducer cable is always loose on the shaft so it bows back some when the trolling motor is down. Not sure if that matters or not.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • smurfy
      Just Food and Drink

      By smurfy · Posted

      By The way that didn't work either!! Screw it I'll just use the cellular. 
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • Mike89
      Just Food and Drink

      By Mike89 · Posted

      I grilled some brats yesterday, maybe next weekend will the next round...  
    • Wanderer
      Just Food and Drink

      By Wanderer · Posted

      You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • smurfy
      Just Food and Drink

      By smurfy · Posted

      Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • Mike89
      Problems with Yetti

      By Mike89 · Posted

      good luck!!!   
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • Wanderer
      Problems with Yetti

      By Wanderer · Posted

      I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • rundrave
      Problems with Yetti

      By rundrave · Posted

      reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept