Jiffy Gas/Oil mix

[Dakota Iceman]

Does anyone know the ratio for a jiffy stealth 2hp? Thanks, Iceman out>

[mltjanderson]

my 3hp jiffy is 24:1

[Ace]

I'm pretty sure they recommend 24:1...5.3 ounces of oil/gallon if you're measuring that way, otherwise you can get the ready to mix bottles...

[Hotspotter]

Go Amsoil, forget about different ratios for each implement, and mix everything 100:1

Joel

[IndyEFI500]

Quote:

---

Go Amsoil, forget about different ratios for each implement, and mix everything 100:1

Joel

---

I have thought about that but am just leary of burning something up. How long has anyone been using the Amsoil at 100:1 sucessfully or unsucessfully?

[Bob_D]

Remember guys.....When it comes to mix ratios, it's all about the oil and not the motor. Amsoil Saber and Opti-2 can safely be run at 100:1 in recreational 2 strokes (Amsoil does make a similiar product for outboards). If you run them in a commercial enviroment (many hours a day), then they recommend ~80:1.

I've been using Amsoil Saber for 3 years (?) now and have yet to cook any of my 2 strokes. They actually run the best they ever have.

[Walleyes4Matt]

I have a 2hp Jiffy and if I recall I put 1 small Jiffy bottle in a 1 gallon jug and shake it well.

[trollingforeyes]

I have used Amsoil since 1985. My 1st use was in a 175 HP Johnson 2 cycle at 100 to 1 ratio. Work great in all 2cycles. Just check the Amsoil web sit to be sure you get the CORRECT 2 cycle oil!

[theoilman]

Use AMSOIL Saber Professional, AMSOIL product code ATP, as lean as 100-1. Some people don't feel safe using it that lean, you won't hurt running it richer, 80-1. Even 50-1 runs smokeless in most machines.

You can order it directly by going through my site, link below.