Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

panfish lake?


quackattack13

Recommended Posts

I doubt you will get much of a response to this as many will not give up a honey hole, panfish hot holes are hard to come by... there are a ton of great ponds in IA and Nebraska.. otherwise I would be willing to bet that Upper Red still kicks out a few monster crappies.

Link to comment
Share on other sites

The lake I fish in Aitkin county has 16+" crappies and 10" gills. This is a consistant producer. Only problem is its privately owned and there is no legal access. You gotta know someone to get there. Can't tell you where it is or I'll have to kill you....

I've already said too much

Link to comment
Share on other sites

Matt's defintely getting tougher to stalk. The guy started using disguises last spring. Riding in someone else's truck. Just plain being sneaky.

I guess a guy's gotta do what a guy's gotta do. wink.gif

Link to comment
Share on other sites

Geez... I turn away for a little while and look what happens grin.gif You guys are too funny...

Actually, there are a ton of excellent panfish lakes around the state, and oftentimes you don't have to travel too far to get on one. Most lakes are abundant with pannies, and it's not uncommon to find lakes in your backyard that are capable of producing large sunfish and crappies.

I always enjoying searching out new bodies of water with the intent of locating big pannies. Take a close look at lake surveys and see which lakes are constantly pumping out larger fish. Lakes that have the ability to hold those larger fish and show decent numbers are usually a good place to start.

Think of lakes where you tied into some big pannies during open water, those lakes can also be hot under the ice.

Be willing to punch a lot of holes and move often, cause that't the name of the game when chasing down slabs and bulls smile.gif

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.