Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Tip up look out


love to hunt

Recommended Posts

Ok, it is possible that this is bringing lazy to a new level but I am going to try it out.

I purchased a wireless security camera on hsolist today and I am going to mount it on the side of my house and pipe it in to my TV for watching tip up's.

camera.jpg

If it works good I will put one on each side for 360 deg viewing.

I figure, why get up to look unless there is something to look at.

I will let you guys know what it looks like when I get it.

Link to comment
Share on other sites

If you want to see lazy you should check out the openwater forum and look at the "Let's see pics of your open water rigs" I just posted pis of mine.

I do remember the stick and string days. I was far younger then and have become a lot laz...wiser since.

DP I will have the tape rolling just for you buddy. I just met you and am already starting not to like you grin.gif

Link to comment
Share on other sites

yea I got one of those rigs like yours on the other post I can be lazy to thats why the 3rd seat from my suburban is in my rig

It is a rush to watch that flag pop when your hanging smelt for toothys though . co,s will think your watching for them. ha ha ha FLAGS UP.....

Link to comment
Share on other sites

a stike sensor is way easier/cheaper and will have much more range than your camera. we even started using them inside on the rattle wheels at night for some added noise for the late night biters -

my .02

Link to comment
Share on other sites

I agree about the strike sensor, seems to make more sense!!! TONS cheaper, less bulky and useable 24 hrs a day and in other weather where you wouldn't be able to see the flags on a camera.

Link to comment
Share on other sites

My only question is that would the DNR recognize this as a legal form of visual contact with your tip-up? I would have to think so. It seems that I remember a fellow saying that he was fined on Red Lake last season for not having visual contact with his tip-up while he was jigging inside his house. I do like your idea by the way.

Link to comment
Share on other sites

The MN DNR regulations state that "Anglers must remain within 200 feet of their tip-up."

It mentions nothing about line of sight so this set-up should be fine. If it wasn't legal those strike sensor or other paging systems would have a hard time selling.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
    • Chef boyardee pizza from the box!
    • Or he could go with leech~~~~~
    • Bear can relate too. Tell Leech to start a new account named Leech5, we'll know who he is.If he has any trouble, Bear can walk him through it.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.