Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Filson Chaps


R. Miller

Recommended Posts

Just wondering if anyone has a pair. I read an article by Gary Clancy in the Outdoor news last winter about them and finally broke down and bought a pair last night. I'm getting to excited for pheasant and grouse hunting. I've always liked Filson products and these chaps seem to fit the bill.

Link to comment
Share on other sites

I have been using mine for a good ten years now and as in the above post "wouldn't hit the field without them". They work great for most all hunting situations and work well keeping my legs warm at colder times. In my opinion Filson chaps are one of the better investments for any outdoorsman.

Link to comment
Share on other sites

Here is my experience with Filson chaps. I bought a pair of single tins about 4 years ago. They lasted about half a season before I completely wore through the cuffs. By the end of the season they were completely ripped from the cuff up. I would have never bought another pair of the non leather cuffed single tins, but I came across a deal on a pair of leather cuffed double tins for around $40. The cuffs on those held up much better, but the buttons by the cuffs and the buttons on the belt loop failed within the first season. I was pretty angry with the performance of the product given their reputation and I fired off a note to Filson. They promptly replaced both pairs of my chaps. They even threw in a leather cuff on my single tin replacements and upgraded my double tins to a more durable fabric cuff and zippered instead of snapped legs. I've still been less than impressed with the durability of these chaps. After a less than a season of hard use the fabric creases and develops holes. I'm constantly sewing them up and rewaxing them. Wicks makes a 1000 denier cordura chaps that cost half the price and will last 5 times as long. While I question their durability Filson chaps are nice to wear. I can push through thorns and wild rose bushes without a care in the world.

Link to comment
Share on other sites

Durability wise, they are okay- Mine are starting to fray really bad around the cuff as well.

They don't seem to breath very well. I sweat a lot in warmer weather.

I also altered mine a bit. I had my grandmother put a heavy zipper in about 12 inches up the side. This way I could slip them on and off w/o taking my boots off.

Link to comment
Share on other sites

I own Filson (double tin), Boyt cordura (very lightweight), and Wicks Works brand. The Wicks chaps have lasted the longest and been the most effective (dry, puncture proof, length, full side zippers). I DO NOT like Filson as I have had to replace all the buttons in the first year. I also hunted in the rain the second time I wore them and they shrunk at least a inch in length. My wife wears them now as they are to short for me. My father-in-law trains "cover" and horseback dogs (english pointers and setters) ALL year long in MN, GA, and ND. I have seen him wear out Filsons in less than a season but he has had his Wicks brand going on three seasons now.

I hope they suit your needs.

You know what they say about opinions...

Mike Martin

Link to comment
Share on other sites

I know I am posting way late from when this thread started, but here goes.My first set of chaps were the Filsons, and I had them about 8 years. They were pretty toasty in warmer temps, but protected my legs well for me. Three years ago I purchased a set of Wick chaps, and gave away my Filsons to another hunter. The Wicks have worked much better for me, and are cooler, plus a bit more roomier.Wicks were cheaper than the Filsons were.

Link to comment
Share on other sites

Cabela's makes a pair of the waxed cotton chaps for about $50. They have both a zipper and snaps. I've had mine for 3 seasons and they are getting shredded on the bottom cuff, but overall I like them.

Sounds like I'll have to check out the Wicks brand next.

Link to comment
Share on other sites

I have had both the Filson chaps and the chaps made by WICK. My Filson chaps didn't last near as long as my WICK chaps. My WICK chaps have finally worn out after 6 seasons of very hard use. Extremely durable, comfortable, and water proof. I too won't head out in the field without my chaps on. WICK makes a great product.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.