Genofish Posted March 30, 2006 Share Posted March 30, 2006 I have the 332c on the console and am thinking of putting my FL-18 there also. Both transducers would be on the transom. Is there a risk of interference if both units are running? I am running a X125 on the Bow. Link to comment Share on other sites More sharing options...
0 Satchmo Posted March 30, 2006 Share Posted March 30, 2006 Yes, there is a very good chance of interferance, but you do have the option of going in to the menu of the 332 and shutting off the sonar output so you can still use the GPS & mapping when the Vexilar is running. Greg Link to comment Share on other sites More sharing options...
0 fish2live Posted March 30, 2006 Share Posted March 30, 2006 i don't think there will be any because i believe vex runs on a different freq than lawrance. i use to run my fl-18 transducer along side my eagle and never had a problem. Link to comment Share on other sites More sharing options...
0 ChuckN Posted March 31, 2006 Share Posted March 31, 2006 I believe fish2live is correct. On my last boat I had Vex and Lowrance transducers next to each other and I don't recall having interference. Link to comment Share on other sites More sharing options...
0 loadmaster Posted April 2, 2006 Share Posted April 2, 2006 I ran my 332c for ice fishing and my parterner was running his vex in the next hole I saw no interference on my unit or his.What a great unit the 332 is for ice fishing>>>later the load Link to comment Share on other sites More sharing options...
Question
Genofish
I have the 332c on the console and am thinking of putting my FL-18 there also. Both transducers would be on the transom. Is there a risk of interference if both units are running? I am running a X125 on the Bow.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts