Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

mossy roof


ssaamm

Question

I was cleaning the gutters last week and noticed there were some decent-sized clumps of moss on the north side of the roof. I could loosen them up and remove a few of them with the leaf blower. I assume that it's a good idea to remove them if possible. Could a person spray a little dilute bleach or something else to kill them off or loosen them up? Appreciate any words of wisdom. Thanks. Go Vikes. A miserable season would be a little better with two wins over the pack. thanks

Link to comment
Share on other sites

7 answers to this question

Recommended Posts

  • 0

yeah, first you are going to wanna do what Hawk said then spray the diluted bleach on the roof. It should be able to take care of itself after that. let them die and they should come off by themself. Thats funny you ask this question because the exact same thing was on "This Old House" this weekend. If you put the zinc strips down remember to put silicone on the nail heads.

Link to comment
Share on other sites

  • 0

I had this same problem on my garage a few years ago. I found a product made for this problem in the Home & Garden section of our local Menards/Home Depot. It came in a spray bottle that you attach to your garden hose. Its sprayed on the roof and over the course of a week or two it killed the moss. It didnt hurt any of the grass or surrounding plant life but you are suppose to try and keep it off such stuff....so its best to do it on a calm day. Sorry, I cant remember the name of the product....

Link to comment
Share on other sites

  • 0

my 2 cents as an x and on the side roofer- zink strips like you guys said. Another thing to keep in mind besides sealing the nail heads is that some of it is sharp as all you know what. I learned the hard way but it only took once!

Link to comment
Share on other sites

  • 0

I re-roofed my parents house 5 years ago (cedar shingles) and we put two courses of zinc strips on the roof. One row on each side of the peak and one row halfway to the d-edge. He used to have lots of moss on the old shingles and previously had to use the bleach method to keep it off. 5 years later the shingles still look brand new. We also cut back a lot of the tree limbs that were near the roof so that it would dry off more thoroughly. Hope this helps you.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • yes sorry for your loss..  our dogs are always special...
    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.