Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Superline knots


nthomps66

Question

What type of knot would a guy use for tying 14lb braided line directly to a spinnerbait or any other lure for that matter?

Last night I lost two spinners to inexplicably loose knots I believe. I tied them the same way I have been for 20 years. I use what I've now recently seen called the "Trilene knot". I'm using Stren Super Braid 14#. I also have another reel with 30# Power Pro that I haven't had this issue with. Those spinners are too expensive to be tossing in the lake without a fight. Help me out...

Link to comment
Share on other sites

14 answers to this question

Recommended Posts

  • 0

I use the uni-knot for superlines and most of the time for mono as well,it just works darn well. Having said that, I've been fly fishing a lot this year and have been using a knot tying tool (makes a nail knot) which works great and is fairly fast to tie. I've started using it some for regualr fishing and it seems to hold up.

Link to comment
Share on other sites

  • 0

I guess its time to change my old ways and learn some new knots.

I just found this site that should help me and maybe others. Fishing Knots

I think you meant the Palomar knot? That looks to be the one I need to learn for the braided line. I'll give the uni-knot a whirl as well.

I was using the improved clinch knot all these years. Of course it says right on that site that it is not recommended for braided lines... Live and learn.

Thanks guys.

Link to comment
Share on other sites

  • 0

I just checked the fishing knot HSOforum as well. The Polymer knot is a great knot, but if you are tying on large baits like Muskie size or even some large spinners, it is difficult to get such large baits back through as shown in step 3. For large baits, use the Uni-knot.

Link to comment
Share on other sites

  • 0

I use the polamer knot .. especially on Fireline. I have had good luck with many knots on Powerpro... but Fireline has a serious attitude, and I have had no problems with the polamer knot.. It is a pain to tie on large lures, but worth it when you can have some confidence in your knot.. The largest lures (muskies/pike) I am usually using a swivel .. this eliminates the issue of having to put a huge loop over the lure.

I have been known to use a coastal lock type snap(no swivel) on twisted eye type spinnerbaits.. the coastal lock does pretty good about not getting weeds. The R type spinnerbaits I still use the polamer... I dont like going to cast and have the bait land 90 yards from the boat with no line attatched either.

Link to comment
Share on other sites

  • 0

All superlines below, say 20lb.test, make for very slippery knots, and Stren Superbraid is particularly slippery (although it's my favorite crankbait line). I've had very few knot failures with lighter braids when using the Trilene Knot. Instructions are listed with all Trilene products, but it's essentially an improved Clinch Knot with the line doubled through the hook/lure eye before wraps are made.

Link to comment
Share on other sites

  • 0

If you check with Pure Fishing (Berkley) they had a list of knots and how to tie them in one of their winter publications. The "palamar" knot is the knot of choice for all braided super lines. In tests that the Berkley boys did down there in Spirit Lake, the palamar knot used on mono and on super lines had 100% knot strength. Meaning the line broke before the knot.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Sounds pretty sweet, alright. I will check them out, thanks.
    • If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?
    • We have bought a new boat, which we will be picking up this spring. It is an Alumacraft Competitor 165 sport with a 90 horse Yamaha motor. I will be buying and installing a trolling motor,  wondering if I can get some recommendations on what pound thrust I will want for this boat?  Also, I will be selling my old boat, is there a good way to determine the value on an older boat ( mid-80's with a 75 horse 2-stroke  Mariner motor)  I will appreciate any help with these questions.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.