Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Best Shots


almostthere!

Recommended Posts

My best shot is a dead on frontal hit. Talk about knocked down power. This shot will put the power-driver on any deer.

Hopefully, this shot will present itself again this season. I've switched to Barnes-X bullets and wanted to see if it will do a full body length pass through.

Link to comment
Share on other sites

i shoot for the heart/lungs used to shoot for the neck alot but i got out of that habit after hearing stories about neck shots missing the bone and not killing the deer. how do you shoot them when they are facing you and not get [commercial-or-naughty-word] from the guts all over inside the deer?

Link to comment
Share on other sites

Ooooo, frontal shots. I don't like them, but I took a buck last year at 45 yards with one. The margin for error is pretty small with a frontal shot. I wont take that shot unless the deer is very close, and it wont turn sideways.

Now, for the part your are asking about. Mine was actually shot with a Barnes X bullet. It was a .338 210 grain boat tail from my .338 win mag. It took out the top of the heart, left lung, came out the rib cage and ended up in the hind knee joint. I found it while skinning. I put it on my powder scale, and it still weighed 210 grains, but was opened up to about .55 inches. It looked just like the magazine ad pictures. The deer ran about 75 yards and piled up.

That is the second Barnes bullet I have recovered. the other was from a buck my wife shot with her .338/06. It went through both shoulder blades, and ended up against the skin on the far side. That one weighed 210 grains also.

Link to comment
Share on other sites

I took a frontal shot last year on an eight pointer that ran right to me and was staring at me from about 20 yards, didn't know what hit him. But typically I aim the saim place as when bowhunting, righ in the crankcase, I dislike neck shots also no matter how close. I slug hunt and use a 3" federal premium sabot. 90% of the time the deer drops in its tracks. Awesome slug out to 100 yards.

Link to comment
Share on other sites

I always shoot for the heart/lung area. As far as 'best' shots with a firearm, I couldn't tell you. I have some memorable ones though:

273yds WT deer on the trot, Alabama last year, .300 Win Mag, 180gr Nosler

210yds Mule deer standing on opposite ridge, Nebraska 6yrs ago, .300 Win Mag, 180gr Scirocco

80yds WT deer standing, MN last year, .416 Rigby, 350gr Speer

Plus archery shots on deer & bear. This year I'm shooting a .500 A-Square with a 600gr bullet (Woodleigh) going 2450fps so I'm hoping to add some more memories with 'non-traditional' rifles.

PJ

I handload and regularly practice shooting at 200-1000yds (used to shoot 50BMG in 1000yd competetion) so I have tuned ammo and experience. I've never had to shoot at a longer range because I believe the best shot is the closest shot, not the longest one. Even though I CAN shoot a deer at 600yds with my equiptment, doesn't mean I should.

Link to comment
Share on other sites

I shot a buck at 125 yards straight on with the 30.06, 180 grain bullet, a few years ago. He just turned & ran off, didn't look hurt, he went about 150 yards on the dead run. His heart was gone. The bullet never exited & I never figured out where it was.

I agree the best shot is the closest shot. I always shoot for the heart/lung area unless I have a clear standing shot at some other angle, or say only the head & neck are visible through the brush at maybe 50 yards or less. Naturally that depends on if I expect the deer to come clear shortly for a better shot. If you've got time to take a deer standing with a close range head shot versus a running shot, it's still probably a better shot.

The best shots I've ever made personally were a running deer through the head at 30 yards, which was an accident, his head was down & I led him too much. Standing doe & walking caribou, both in the 250 yard range.

Link to comment
Share on other sites

I always shoot for lungs. I figure less blood clotted meat to clean through. The neck is too small for me. If I was hunting public land and a nice rack came by I would go shoulder to knock it down on the spot. Lung shot deer always run a ways and I don't want to argue with another hunter if it runs his way. On the private land I hunt there is room for one to run and they usually run the direction of the house so the drag is less. I did accidentally hit one in the neck last year with a standard 12 ga slug. O Boy did that deer drop!! That was a great deer to butcher.

Link to comment
Share on other sites

I like a double lung shot from the side but high enough in the lungs that the "shock" effect is felt in the nervous system.

As close you can get to the spine while hitting both lungs is the best. I have had 3 deer pile up and die immediately while they were running full boar on drives when I have hit that spot. They didn't even kick. All taken with a .308.

I avoid frontal or neck shots when possible.

Link to comment
Share on other sites

My best shot was one that was about 4 feet from me. I didn't even aim, just pointed the gun. It was a doe and was going to jump the fence right next to me. I hit her right the melon, blow her brains out! She never even saw me. She was just going for a Sunday walk in a field and BANG! It ran about an inch! No, the deer was not tied up!! I get that one from my hunting party.

Link to comment
Share on other sites

My best shot was a heart kill on a doe that was running full speed at about 300 yards away with a Win. 300 mag. Don't take this as bragging because I was as amazed as anyone and I could venture to guess that that would never happen again. This was after I had jumped the doe while walking back to the truck from my stand. What an experience!

Link to comment
Share on other sites

of the three deer i have shot since i could start hunting all have been horrible shots ( not where i was aiming or expecting to hit ) but all have dropped the deer in its tracks, one i jumped and shot it at about 20 yards in the neck out the jaw, one i shot at 17 yards on the run ( i missed it from about 20 while it was standing) hit that one in the neck right at the base, spun in a circle and dropped and the last one i missed at about 30 yards standing still and it ran towards me, droped him at 2 yards straight down from my stand. but ive talked enough, lets see what i can do this year.

RR56

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.