Older lowrance question.

[Sherpa]

So I picked up a used boat last weekend and it came with a Lowrance LCX 20c. There is a grey box that is displayed in the lower right corner with gps and speed info (see pic). I have gone through the menu and manual trying to find out how to remove it from the display with no luck so far. Anyone out there know how to remove it? 

[gunner55]

We have 1(520c) with the same buttons & I would try hitting exit. If that doesn't work hit pages, scroll down, hit enter to put it in a different screen. there should be 1 that doesn't display all the numbers

[delcecchi]

Maybe in overlay data? 

Or isn't there a setup option to return to factory defaults?   As a last resort of course. 

Edited September 23, 2015 by delcecchi

[Sherpa]

Thanks guys. Not sure if I tried hitting exit or not. I will give it a shot. I have definitely tried going through the overlay data, but I might need to look again. I think there is an option to restore factory defaults. I'll keep that in mind too. Would that cause me any headaches other than having to go back through to set things up the way I prefer them?

Edited September 24, 2015 by Sherpa

[delcecchi]

Not sure what it does to waypoints to do a factory reset.

 

[Hoey]

The Overlay data is the depth, time, temp, and ground speed across the top.  The gray box may also be Overlay, but it looks more like the box that comes up when you are on the map/gps page and you use the directional keys to move the "cursor" to another area on the map.  Or you have used the directional arrow keys on the Sonar screen.  If so, just press Exit.  Just a guess....

[delcecchi]

Yes, hitting exit or return to vessel or whatever sounds right.  Thanks Hoey. 

[Sherpa]

Wow it was that simple. I hit exit and it was gone. I'll let you guys know if I have any more tough questions...Ha! Thanks for the help guys.