Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Outerwear


collegepaul

Recommended Posts

I'm looking for some product feedback on jackets and bibs you use during the deer firearm season. I'm new to hunting and looking for a good product. I've been doing some searching, and outside of Gor-Tex, I'm not too familiar with some of the materials. I'm wondering how dry these jackets stay. Has anyone come across a jacket or bibs that said it's waterproof but still ended up soaking wet? Or am I better off opting for Gor-Tex gear?

I was looking at Cabelas and some of the materials feel like they would absorb moisture/water even though they say water proof. Any recommendations would be helpful. Thanks for the feedback!

Paul

Link to comment
Share on other sites

A few years ago I got the Cabelas Wooltimate pants and jacket and just use a blaze vest over them for firearms. I also use these for bowhunting when it's cold. They are very warm. I would say that as long as you aren't in a steady rain these shed water pretty good. Plus they are quiet. I like them a lot.

Link to comment
Share on other sites

I purchased the Cabelas Whitetail Extreme outerwear a few years ago and have been really happy with it. I've been out in rain, freezing rain and snow and each time have stayed completely dry and warm on the inside. Definitely blocks wind well too. The outer material is very quiet and will get a little wet however the goretex is sandwiched in the middle of the layers of fabric and keeps you dry.

One of the main things with all Goretex clothing items is to keep the DWR (durable water repellent) fresh. This is a coating that causes the water to bead on the outside fabric and run off. Once your outer fabric gets soaked, moisture can eventually seep through Goretex. The DWR prevents that outer fabric from getting soaked.

Link to comment
Share on other sites

I would say what most people see as Goretex wearing out is the DWR loosing it's effectiveness. Once the outer fabric is saturated then it can seep through Goretex overtime. DWR can be revived through gentle washing and tumble drying. Eventually if that doesn't revive it you can buy spray on or wash in reapplications.

Link to comment
Share on other sites

I would say what most people see as Goretex wearing out is the DWR loosing it's effectiveness. Once the outer fabric is saturated then it can seep through Goretex overtime. DWR can be revived through gentle washing and tumble drying. Eventually if that doesn't revive it you can buy spray on or wash in reapplications.

If there is a saturated layer over the Goretex it doesn't breathe. Still keeps the water out. First gen goretex used to leak if you were sitting in a puddle like a boat or canoe seat.

Link to comment
Share on other sites

I looked at various options when I needed new outerwear for rifle season. I didn't have a big budget but I wanted something that could be worn in various weather conditions.

I ended up finding a lighter blaze orange rain suit with jacket and pants that came with a decent liner. I can't remember the brand off the top of my head but I found them at Fleet Farm and I think I paid around $80-100 for the set.

I use the rain suit as an outer shell and its windproof and water proof. Then under it I use various layers of under armour, fleece, wool, etc that I already owned. I purchased the rain suit one size larger than I would typically need so that it can be used over thicker under layers when its bitterly cold. In the last few years I've hunted in rain, snow, 10-15 degrees, and up to 50 degrees and I've been able to modify my under layers to keep comfortable in all conditions.

In the past I've used the heavier/bulkier blaze orange jackets and bibs that are on the market and I didn't like the bulk when climbing in and out of stands or when using my climbing stand. Using the rain gear as a shell and building my under layers as needed allows me to avoid the bulk but still keep plenty warm.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • My kid was eating in Beverly Hills and ran into this guy. Talked to him a bit and wished him luck in the game tonight.     
    • 🤔as a recovering machinist!🤣🤣that must make me a recovering welder!
    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.