Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

How do big pontoons (tritoons) handle big water??


stpauliguy

Recommended Posts

Well, due to a couple of young ones, I believe my fishing boat days might be over for a few years. I have a 20' fiberglass boat now but was looking at some pontoons this weekend. I've seen nice tritoons and some pontoons on mille lacs before and they seem to do well on it. Soooo, looking for some info on how they handle the waves and if they're decent boats to fish out of. I'm thinking rod holders, trolling motors, possibly down riggers.... Any ideas or info on these things would be greatly appreciated!!

Link to comment
Share on other sites

When you get into the tri toon rigs, you're getting into the big horsepower and big water boats so if lakes like Mille Lacs are your preferred play areas I wouldn't consider anything less.

I had my toon out on Mille Lacs last year and ran my downriggers after bobber fishing from anchor. I really enjoyed the idea of what I was doing but it was pretty windy and wavy and made it tough for this skipper to be the one man show running everything. My toon is a 20 footer with 2 - 25 inch tubes and 90 hp 4 stroke Yammy. It did handle the traveling pretty well.

The biggest thing with pontoons is dealing with the wind while you're fishing. The drift is much faster and the nose will bounce quite a bit if you load the weight back to keep the waves from washing over the deck to a minimum. I have to believe the tri toons are much better at handling the waves but I know I wouldn't recommend expecting good family time in double toon in rough conditions.

My toon is rigged with a TM, twin electric downriggers, rod holders and I carry drift socks and anchors of course. There really isn't much fishing I can't do with it but just realize the more gear you work with, the more work it is for you if you're the only one on board that knows how to handle it. I do really like the riggers mounted on the front deck so I can cruise and keep and easy eye on them while tracking the balls and baits with my stern mounted transducer. I can pretty much see everything that's going on.

They can be very versatile fishing machines but are still more fair weather designed. That being said, there's a lot to say for taking the Fam out, fishing for whatever you want, pull knee boards/tubes, anchor in whatever bay you want to hang out in and swim and grill for a nice break.

One final thought - the bigger the tubes, the better. You want to keep it riding as high in the water as you can when she's loaded down AND you WILL be loading it down! grin

Link to comment
Share on other sites

My Brother has 24 foot pontoon for over 20 years. They really do not handle rough water well at all in my opinion. They plow straight into oncoming wave taking them over the deck in really rough water or even from large boat wakes. At trolling or drifting speeds the deck is only 20 inches above the water and due to the length 24 ft plus they do not ride the wave. Think of a jon boat at rest. They are prone to taking water over the front from passengers suddenly changing sides in heavy seas unless you talk to them ahead of time. My brother has had this problem when a quick squall line hit and wave came over and all the adults who had been drinking ran from one side to the other causing one pontoon to nearly submerge then 50 mph wind gust got underneath lifting it up. I fish with him at the family cabin frequently it is very comfortable for bobber fishing in calm conditions. It is very difficult to anchor as the sides act as sails and if the top is up forget anchoring. They do not drift slow they have no keel so they do not track well and are light and drift very fast. He has 40 hp 4 stroke and it trolls down to 2.2 mph so he can only troll raps or other crank baits. once again if the wind is up it does not track well. He has Minnkota bowmount but he did not listen and went with 12volt unit and it is only good in dead calm conditions. I am not trying to discourage you as pontoons are great with youngsters and wives who are not really into fishing and need to move about. They are very fair weather fishing craft and limited as to what they can do. Now I have no experience with a 30 footer tri pontoon with twin 115 hp like I have seen on Vermillion but they did not appear to have any fishing gear aboard only babes.

Mwal

Link to comment
Share on other sites

I think the others covered most of it. I will say that being on a good size lake up in the Brainerd area just about every weekend during the summer you see just about every kind of water craft at some point. I fish mainly on rough days and I am always amazed to see how well some of the guys do with big pontoons out there. I think the tritoon does better in rougher water then the twintoon is that the middle toon kind of bridges the gap when big waves are happening. Especially when you have to ride across waves. The twintoon has to ride up and then will fall off at the top of each wave and then the next toon has to go over the same wave rocking the heck out of you were the tritoon with the middle toon gives the whole boat lift over the whole wave making a smoother ride and less rock. Also, I have seen planty of the bigger toons pulling waterskiers and tubes so they have come a long way then just a party barge! But, I think I'll keep my deep-V wink

Link to comment
Share on other sites

They work OK, we used one for years on Mille Lacs. In addition to the fast-drift, wind-sail effect (which you can use drift socks to slow you down), they do have the tendency to spear oncoming waves, and have a lot of water come over the top of the deck. Think coolers-floating-to-the-back. Will you sink? No. But, it's still not the ideal situation.

Up at Terry's boat harbor, there was a 'toon docked that had a little ram-thing mounted to the front deck. It was basically an aluminum sheet as wide as the pontoon (maybe slightly wider) that stuck out front about 3 feet and was angled up at about a 45 degree angle. It looked like it would actually help lift the front over the waves. I talked to the owners, and they said they got a much drier ride after adding it.

Link to comment
Share on other sites

Thank you all for the informative info! Im thinking tri is the way too go. Especially because of the motor size. Years ago, my uncle had a pontoon and was terrible to load/unload at the access. Have they gotten any better?? I would hate to not be able to access the thing.

Wanderer, do you have any pictures of your boat?? Would like to see the layout, especially with your downriggers. You can send them to [email protected].

Link to comment
Share on other sites

Thank you all for the informative info! Im thinking tri is the way too go. Especially because of the motor size. Years ago, my uncle had a pontoon and was terrible to load/unload at the access. Have they gotten any better?? I would hate to not be able to access the thing.

Wanderer, do you have any pictures of your boat?? Would like to see the layout, especially with your downriggers. You can send them to [email protected].

My neighbors on each side have pontoons. They are not a 16 foot lund semivee on a roller trailer to launch but it is pretty easy if the ramp goes into deep enough water.

Link to comment
Share on other sites

Yep, I got a couple.

In this pic the booms aren't fully deployed. They slide out to 48" and I believe that's just enough to be mounted on the front of a boat.

full-17997-43356-image.jpg

I put them on swivel bases so they can be stowed for the drive north.

full-17997-43357-image.jpg

But that bobber fishing can be REAL nice at times.

full-17997-43358-image.jpg

If you plan to trailer your toon a lot, get a bunk trailer rather than a scissor style. They load very easily and handle the road better.

Link to comment
Share on other sites

I do agree with you on a bunk for any toon. When we had ours I just hated how that thing would some times start jumping around on the scissor style trailer and get all side ways. Same thing happens when we put my buddies in every year and the launch road is bumpy. Oh, and he learned that if you forget to jack up your scissor trailer high enough after unloading. You can actually wear down the tires to the cord by the time you get back to the cabin around the lake! laugh

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.