Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

Value of 06 trolling motor


delmuts

Question

Not finding much on line to try to determine the value of my 06 minnkota 24 v 80# 52 inch shaft with I-pilot.

A friend in interested but would like some ideas. Not much on line to help. Is half of new a good price? I know little about the motor as I just bought this boat this summer. I will be going to a cable foot control minn. this spring. Thanks Del

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

PD2 autopilot? I thought the PD2 were 70 lb. US2? US?

Looking at hsolist I might guess 250 to 300 for the motor. Is the ipilot v1 or v2? Maybe 250 for a v1 3something for a v2? That is just my guess, so like 500 for the whole thing if you are lucky? Depends on condition of course.

Not best time of year to sell either.

Link to comment
Share on other sites

  • 0

If I were going to give you an offer it would be in the $200 to $250 range. Of course it would depend on the general condition, what the overall usage was, and that the motor is going into it's 8th season. These motors tend to develop electronic board problems which cost over $200 to repair and that possibility would be in my mind when making any offer.

Check the FM classifieds, cee-list or Ewater sites for price comparisons .

Link to comment
Share on other sites

  • 0

I talked to a local dealer yesterday. Was told they call it auto pilot.( point the head, press the button on top then motor will hold that course) He could tell me everything about the different models, and was sure of what I had. Said value was 350 to 400. Thanks

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.