Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

What Pound Line on a Jig Rod?


MN BassFisher

Recommended Posts

So I'm getting a new Citica or Curado here in the next couple weeks. This reel will be my first 7+:1 gear ratio and I plan to either use it on my heavy cover jig rod or my froggin rod. I'm curious what pound test of line I should throw on it however. Any opinions? 65 PP?

Link to comment
Share on other sites

I use 65lb PP for frogs and punching matted vegetation. For jigs i use 50lb PP when i'm not using a heavy fluoro. Last year I did use some 65lb PP for 1/2oz jigs in some really thick grass and it worked decent, but i feel that 50lb is more ideal for those 1/2oz and under jigs. Now if you used a lot of 3/4oz or even heavier jigs in heavy cover (more of a punching or heavy flipping situation) than i'd say get some 65lb.

Link to comment
Share on other sites

I put some 25 pound fluoro on a rod last year to fish heavy football jigs. I hated it. Fluoro to me is harder to manage but that thick was insane even on a baitcaster. it wasn't the most expensive fluoro though, so that may have been a part of it. I switched it over to 50# PP after a couple outings.

Link to comment
Share on other sites

I caught a few 4lbers and a 5lbers last year with a bunch of 3's and 2's. I used 30lb PP for jigs and frogging. 30lb works quite well already. All the bass I pulled up, there has never been a point where I felt the line was going to break. I felt like the rod was going to break instead.

50lb is considered safe.

Link to comment
Share on other sites

I caught a few 4lbers and a 5lbers last year with a bunch of 3's and 2's. I used 30lb PP for jigs and frogging. 30lb works quite well already. All the bass I pulled up, there has never been a point where I felt the line was going to break. I felt like the rod was going to break instead.

50lb is considered safe.

This is why I use 30lb as well. I'd rather the line break than the rod. Obviously big money tournament fisherman would rather break the rod than lose a fish.

Link to comment
Share on other sites

I just got that new Super Slick Power Pro line in 50# and it casts REALLY well.

For my jig rod, I always have flouro on, so like Larson said, learn how to tie a connecting knot. I have Seaguar Invisx 15# on my deep jig rod.

Link to comment
Share on other sites

Thanks for all the input fellas! I was experimenting with flouro last season, but I find it a bit harder to manage on a casting reel so I will probably wind up spooling er up with some 40# or 50# PP. That's nice to know the Super 8 is good, I was curious about that line.

Link to comment
Share on other sites

I've got one jig rod that I use with 50 lb power pro, and one jig rod that I use with 17 lb flouro. To be honest with you, I don't see a big difference in the user friendliness level of the braid vs. the flouro. I think you have to be maybe a little more precise/careful with the flouro, but with a little practice that isn't too hard to do. I would also toy around with the settings (spool tension, brakes, etc.) on your flouro reel to help get it dialed in a little better. If you spend a little time doing that I think you will see a world of a difference in the performance of flouro. BTW, I have both jig rods paired with shimano curados and they both perform equally well. I wouldn't give up on the flouro yet if I were you.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
    • I haven’t done any leaf springs for a long time and I can’t completely see the connections in your pics BUT I I’d be rounding up: PB Blaster, torch, 3 lb hammer, chisel, cut off tool, breaker bar, Jack stands or blocks.   This kind of stuff usually isn’t the easiest.   I would think you would be able to get at what you need by keeping the house up with Jack stands and getting the pressure off that suspension, then attack the hardware.  But again, I don’t feel like I can see everything going on there.
    • reviving an old thread due to running into the same issue with the same year of house. not expecting anything from yetti and I already have replacement parts ordered and on the way.   I am looking for some input or feedback on how to replace the leaf springs themselves.    If I jack the house up and remove the tire, is it possible to pivot the axel assembly low enough to get to the other end of the leaf spring and remove that one bolt?   Or do I have to remove the entire pivot arm to get to it? Then I also have to factor in brake wire as well then. What a mess   My house is currently an hour away from my home at a relatives, going to go back up and look it over again and try to figure out a game plan.           Above pic is with house lowered on ice, the other end of that leaf is what I need to get to.   above pic is side that middle bolt broke and bottom 2 leafs fell out here is other side that didnt break but you can see bottom half of leaf already did but atleast bolt is still in there here is hub assembly in my garage with house lowered and tires off when I put new tires on it a couple months ago. hopefully I can raise house high enough that it can drop down far enough and not snap brake cable there so I can get to that other end of the leaf spring.
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.