Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Thoughts on home WiFi routers


BobT

Recommended Posts

Dell Dimension Desktop PC hard wired to Linksys WRT120N router.

Router wired to BEC DSL modem supplied by ISP this past summer.

Windows Vista Home Premium 32-bit OS with 2GB RAM

WiFi components include:

Epson Workforce610 Printer/Fax/Copier/Scanner

Dell Mini with Windows7 Starter OS with 2GB RAM

HP Mini with Windows7 Starter OS with 2GB RAM

ThinkPad W510 laptop with Windows NT OS with 3GB RAM

Wii console

Except for the modem, we've been using this system for the past couple years with little to no trouble at all. This past summer after a nearby lightning strike we began to experience trouble with our internet connection. An ISP technician came out and discovered a faulted filter on the phone line and replaced it. Our problems seemed to go away for a couple weeks but then returned. The WLAN seemed to be functioning just fine. Our ISP came out and installed a the new BEC DSL modem and performed other test but the problems continued.

Eventually when our system became too unstable I rewired our system to bypass the router and connect our desktop directly to the DSL and then ran a continuous ping test for 72 hours. The test results indicated that our network connection was uninterrupted with no packet loss or other problems. This test seemed to point to our router as the source of our problems. I decided to reset the router back to factory defaults one more time and then reinstall the latest firmware one more time (I had done this numerous times already). To our surprise the system began to operate without any more trouble for a few weeks and now the problems have returned.

A couple days ago I searched for reviews for the WRT120N and my research indicates that this is a common problem with this particular router. In fact, virtually every review I read mentioned this problem.

I would like to replace our router. We use it to provide internet access for our laptops, wireless connection to our printer, and access to Netflix via the Wii console. No online gaming or HD data streaming is done at this time. I suppose there is a potential for HD streaming in the future but I do not expect to be doing any online gaming. I do not require high security. We live in the country and our nearest neighbor is 1/2 mile away. If someone wanted to connect to the internet they’d have to drive down our 250 yard long driveway to park on our front lawn.

I would like recommendations for a decent reliable wireless router that won’t dump my wallet. Any suggestions would be appreciated. If there is such a thing under $100.00 that would be great.

Thanks,

Link to comment
Share on other sites

I only have had experience with an older linksys that did work good for me. I read a few reviews of the home wireless routers and Linksys and Netgear have the highest ratings.

But it does sound like you got a lemon or that model was a dud.

Link to comment
Share on other sites

It's entirely possible that it got damaged when that filter was taken out by the lightning but when I read those reviews it makes me wonder.

I have seen and heard that Linksys usually gets decent reviews. I've been looking at another Linksys model. The E1200 seems to come with good reviews. I don't know anything about other brands though.

Link to comment
Share on other sites

It's entirely possible that it got damaged when that filter was taken out by the lightning but when I read those reviews it makes me wonder.

I have seen and heard that Linksys usually gets decent reviews. I've been looking at another Linksys model. The E1200 seems to come with good reviews. I don't know anything about other brands though.

Look at Tiger Directs deal of the day today. E1200 for $15 after rebate.

Link to comment
Share on other sites

We had similar issues a while back and our (Linksys) wireless router had to be reset often, sometimes multiple times in a day. It was an older model and gave good service for a long time. Since the kids are gone, we dont do a lot of heavy internet use, and for familiarity I chose another Linksys. This one is an E 1000 and in the 2 years I've had it I dont remember having to reset it more than a couple times. So far I've been totally satisfied with it for my type of use.

Link to comment
Share on other sites

I had a belkin. It got flaky. Bought another Belkin, it was flaky from the git go. Went to wally and got a linksys and it has been great. No problems. Even has the "guest network" feature so you can give someone access to the net without giving them access you YOUR network. It streams netflix and amazon perfectly. (I have charter internet in Rochester)

If you can get that for 15 bucks I would jump on it. I think I paid in the neighborhood of 50 for mine.

Link to comment
Share on other sites

I remember reading something about an opensource firmware for these routers that are having connection and reset problems. Seems to me as long as the router is working the problem is in the firmware. I have a net gear WRN something and every time I have to reset it it seems to take a little while for it to settle down as my kids are whining about their Ipods not connecting:) sometimes it's a blessing though:)) I would google opensource firmware for wireless routers and try to stabilize it before I replaced it.

Link to comment
Share on other sites

I've owned my linksys router for about 5-6years... 3 laptops... 1 comp... 2 wii and my cellphone all use it.. no issues.. beside it occassionally over heating and needing a restart.. but that'll happen when I'm downloading at 500+kb/s and all that other stuff is accessing as well

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • Bighorn sheep at Lemoille canyon.   
    • Wild horses in Sparks Nevada   ad
    • Donner lake near Donner pass in California   
    • Redwoods near Big Sur California.  
    • Power output is:  amps x volts = watts   If your charger is pushing 10amp at 12 volt: 12 x 10 = 120 watts.  2 banks = 240 watts.   240 watts / 120v at your outlet = 2 amp.   Efficiency isn't 100% so it's gonna be more than 2 amp on your garage circuit, but maybe like 2.4 amps.     I think.... It's been a while, LOL.  Either way 20amps output on a charger for a 12v battery isn't the same as pulling 20amps off your garage circuit.
    • Wanderer, thank you. I did look at the breakers for my garage/outside outlets and they are 20 amp.  I reached out to the company that makes dual pro chargers with the question and this is the reply I received.:     Thank you for reaching out to us here at PCS. The Sportsman series charger, although rated ay 10 amps per bank, draws only 5 amps from AC when all banks are charging. As the Professional series which provides 15 amps per bank, has a maximum AC draw of 7.5 amps with all banks charging.  
    • That’s an interesting point.  While I understand how Amps work, I can’t say I’m fully versed in the draw of modern on board chargers.   By modern code, outdoor and outbuilding outlets should be 20 Amp.  If your outside or garage outlets are 15 Amp, they’re undersized.  But that is quite possible if the garage was built before that code became enforced.   With heavy use, you may not be able to keep up on daily charging without the 10 Amp per channel charger, however that’s with very aggressive use for consecutive days.  On our June muskie trip we run up to 15 hours a day for up to 7 days on a 24V Ulterra and by mid week we’re starting to see the batteries not reach full charge.  That’s a lot of bank running at nearly 2 mph on windy shores.   We charge at a dock with up to 6 boats per dock plugged in - some with 36 volt systems.  Now I’m not sure if all the outlets are on a dedicated circuit but I’m betting they aren’t.  But they’re all 20A outlets with a lot of draw on them.  At max draw, they’re not keeping up but also not tripping the breakers.   What I’m saying, without a technical review is: you’re probably fine either way.  You probably won’t tax your batteries so much that they can’t recover on a 5 Amp per channel overnight charge and a 10Amp per channel charger probably won’t be too much to plug into your 15A outlet - if it really is a 15A.  If you’re sure, you’re sure, but I would double check if you’re not 100%.
    • Another question- I wil be running 24 volts on the trolling motor for this boat, what amperage onboard charger should I buy? Some have told me 10 amps per channel, but at full draw that would be 20 amps, and my outlets at home and where I plug in at the lake is only 15 amps, is 5 amps per channel enough to charge batteries overnite after using spotlock during the day? Thanks for the help.
    • Got a look at a condor yesterday at Pinacles national park. This was the best I could zoom with my phone.  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.