Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

More Power?


Hester

Recommended Posts

Hey, I am planning on getting my first bass boat sometime soon and was wondering if my current vehicle has enough power to pull a fiberglass boat?

I have a 1998 Jeep Grand Cherokee Lorado. It has the strait six in it and I believe its just a 4.0 liter. Do you guys think this will be enough or not?

thanks.

Hester

Link to comment
Share on other sites

If you look it up on msn autos, it will tell you all of the details of what your Cherokee can tow. Make sure you have the right trim package selected though. I'm assuming you have the 4WD package, in which case you have max towing of #6500. Standard towing of #2000.

One thing: if you don't have 4WD or AWD, get something that does. Some landings can get awfully tricky (especially in low water) and on more than one occasion I've been happy I've had my AWD.

Link to comment
Share on other sites

I'm sure it will pull it. I would be concerned with stopping it and having control of the entire rig in case of a tire blowout or something of that nature. I've seen people tow with less vehicle. Personally, I think a full size truck frame is important for safety when towing a big glass boat. I had a little chevy s-10 when I got my first glass bass boat. Boat was 17' and heavy enough to concince me to go with a bigger vehicle when I could afford it.

Link to comment
Share on other sites

A couple of other things i'll add. Will the boat trailer have brakes? If so, be certain to have them adjusted properly. If not! Be warned that if you have to get on the brakes hard, it will push your vehicle. ( with my old bass boat[with out brakes] it would jackknife the truck, so i had to stand on the brakes, then let off for a second them back on them)

One other thing you can do when you pull out/up a ramp is to power brake the rig.( stepping on the brake as you step on the foot feed) This will give you a little bit of a lurch(sp?) to help get the rig rolling forward.

Also! The four wheel drive is very handy on ramps that have algae on them. ( slippery little things! grin)

Link to comment
Share on other sites

Any bass boat under 19ft with a single axle trailer you should have no problem with. Anything bigger I would probably consider something else. Like mentioned before, you wont have any problems pulling the boat with that 4.0 especially in Minnesota since its relatively flat. The biggest issue you will face is having the stopping power. Also, depending on how big of a boat you are getting and how much weight is on the hitch it might seem like you are driving up hill.

Link to comment
Share on other sites

Will the boat trailer have brakes? If so, be certain to have them adjusted properly. If not! Be warned that if you have to get on the brakes hard, it will push your vehicle. ( with my old bass boat[with out brakes] it would jackknife the truck, so i had to stand on the brakes, then let off for a second them back on them)

That was my first thought too. Absolutely and without question, get brakes on your trailer. I won't own a boat trailer without them - unless it's a little jon boat or something. They're the cheapest insurance you'll ever buy, and if you only really need them once, they more than paid for themselves. Getting pushed by a trailer is no fun, believe me.

The other must-have add-on, if you don't already have one, is a transmission cooler. Pretty cheap to have one installed, and will definitely increase the lifespan of your tranny.

I used to pull a 17' glass boat (big V-hull) with a Cherokee and it was fine. Not as easy as a full-size with a v-8, but it'll do the job.

Cheers,

Rob Kimm

Link to comment
Share on other sites

You should have no problem pulling that rig with your Jeep. I pulled my 19' Stratos for 13 years with a Ranger with a 4.0 no problem ever. I pulled it a couple of times with my wife's Liberty and that did the trick also. I usually pulled my rig over 100 miles each way when it was in tow. Like others have said, you want brakes on the trailer.

Link to comment
Share on other sites

I towed a 21' fiberglass with dual axle trailer from TN to MN with my 4.0 V6 Explorer. That was a 16 hour drive. In most parts of MN, its mostly flat surface so I have no problems during the summer. btw, the dual axles and trailer brakes really helps!

In the past 3 years, I've towed a deep V 17 footer and my Ford still runs like a champ.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • got this tackled today took about 3 hours to get both sides done. Didnt even get to use a torch....   Thought I was golden with just jacking it up and I could get to everything but no luck. Had to remove the entire axle hub and brake assembly to get to what I needed. Was a pain but still better then taking off the entire pivot arm.    Axle bearings were already greased and in great shape thankfully. Got both leaf springs installed and its ready for the road again.   Probably going to have my electric brakes checked, I am not touching anything with the brake drums. Based on what I saw it doesn't look like my electric brakes have been working anyway. Brakes are nice to have if its slippery out
    • By The way that didn't work either!! Screw it I'll just use the cellular. 
    • It’s done automatically.  You might need an actual person to clear that log in stuff up.   Trash your laptop history if you haven’t tried that already.
    • 😂 yea pretty amazing how b o o b i e s gets flagged, but they can't respond or tell me why I  can't get logged in here on my laptop but I can on my cellular  😪
    • I grilled some brats yesterday, maybe next weekend will the next round...  
    • You got word censored cuz you said        B o o b ies….. haha.   Yeah, no… grilling is on hiatus for a bit.
    • Chicken mine,  melded in Mccormick poultry seasoning for 24 hours.  Grill will get a break till the frigid temps go away!
    • we had some nice weather yesterday and this conundrum was driving me crazy  so I drove up to the house to take another look. I got a bunch of goodies via ups yesterday (cables,  winch ratchet parts, handles, leaf springs etc).   I wanted to make sure the new leaf springs I got fit. I got everything laid out and ready to go. Will be busy this weekend with kids stuff and too cold to fish anyway, but I will try to get back up there again next weekend and get it done. I don't think it will be bad once I get it lifted up.    For anyone in the google verse, the leaf springs are 4 leafs and measure 25 1/4" eye  to eye per Yetti. I didnt want to pay their markup so just got something else comparable rated for the same weight.   I am a first time wheel house owner, this is all new to me. My house didn't come with any handles for the rear cables? I was told this week by someone in the industry that cordless drills do not have enough brake to lower it slow enough and it can damage the cables and the ratchets in the winches.  I put on a handle last night and it is 100% better than using a drill, unfortatenly I found out the hard way lol and will only use the ICNutz to raise the house now.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.