Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

How to fish breaks for Walleye


Bogie04

Recommended Posts

Just looking for some good walleye tips when it comes to fishing on breaks (shallow to deep) I've been switching it up lately with not much success. Is it best to set up on the bottom, top, or middle of a break. Any insight on this topic would be great grin

Link to comment
Share on other sites

Let your flasher do the talking !

If your marking fish and catching a few your in the right spot. I guess I like to setup in 16' of water with it dropping into 20+ feet and the top of the break is around 10'. I seem to have better luck working inside turns rather then points. If it is a flat that is deep that tops off at 20' I like to fish right on the edge of the top.

Link to comment
Share on other sites

I like to fish the whole thing if its smaller. Say 50 yards or so from bottom to top. I like to drill plenty of holes up and down the break well as well as along it each way before go time and start at the bottom and follow them up to the top. With 3 poles rigged with different baits you will increase your catch by just changing poles rather than retying. Stay mobile and move w/the fish. I find it more productive than picking a particular depth and hope its the right one. I've hoped i picked the right depth many times and had a flurry of activity for about 15 mins. and catch a couple fish. Learned from a fellow FMer to drill about a dozen or more holes, depending on the size of the break, and keep moving up the break, and along it, and have activity for 30-45 mins. and taking home a limit or close to it almost every time out! Hope this helps!

Link to comment
Share on other sites

Thanks for the info guys! I really need to start moving around more thats for sure. I've been sitting tight at one spot just hoping for something lol. I've been getting into plenty of small walleye anywhere from 9-11 inches...cant seem to find where the bigger ones hang out.

Link to comment
Share on other sites

I like to work the deeper water early before dark and hole hop back towards the shallower flat towards dark and will typically setup a tipup in the shallow water at the top of the break and work back towards it. If it is cold and I'm gonna sit I still drill holes shallow to deep and will set a tipup shallow or midway between the top edge and where I set the house to fish. Like has been said previously, let your flasher tell you where to go. Depending on the depths you are targeting, getting there early and drilling holes before primetime can greatly improve your odds if you are fishing in water 15' and less. Try to decipher the movement patterns of the fish. Is there a large flat or weedline nearby that creates a shallow feeding opportunity or is it the breakline itself. Are the fish relating to anything like a point or rockpile? Are the fish just travelling paralell to the break feeding as they go or moving into it perpendicular to chase bait onto shallower flats?

Tunrevir~

Link to comment
Share on other sites

I've been getting into plenty of small walleye anywhere from 9-11 inches...cant seem to find where the bigger ones hang out.

You might have to give up on that spot and find a different one. It might be a problem this winter and the baitfish the bigger one's want just are not there or not there during prime time. I have found spots that work great for a few years and then they go bad for a few.

The one thing foe sure is the bigger walleyes do not school with the small ones.

Link to comment
Share on other sites

I like to fish the top of the closest flat, hump, sandbar whatever at low light periods. After the sun is up for the day, then I will move and fish the break. This year is different for some reason. The nice fish I have found have been deeper, like over 22FOW and aren't moving up to feed in the evening. Well, some nights they do, but most nights not. Lakemaster chip is maybe more useful than the vex IMO...especially when you are jigging and bobbering just off of bottom for eyes.

Link to comment
Share on other sites

I like to fish the top of the closest flat, hump, sandbar whatever at low light periods. After the sun is up for the day, then I will move and fish the break. This year is different for some reason. The nice fish I have found have been deeper, like over 22FOW and aren't moving up to feed in the evening. Well, some nights they do, but most nights not. Lakemaster chip is maybe more useful than the vex IMO...especially when you are jigging and bobbering just off of bottom for eyes.

The chip will help get you close, but the vex will let you know exactly where on the structure you are.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.