MJ

[bassNspear]

what was thet chicel you had from jiffy?

[MJ1657]

Jiffy mille lacs

[bassNspear]

the stanard one??

[MJ1657]

Its the two piece deluxe model.

[merkman]

what was thet chicel you had from jiffy?

You didn't dump MJ's chisel in the lake now did you BNS????

If not it makes a good rumor...

[Gordie]

Do we need to have the teatherd and floatation device talk again

[dealer]

what lake did you drop it in mj and how deep were you i have some heavy duty magnets that could probably pick it up

[MJ1657]

They are giving bns and Laska a hard time. My chisel is high and dry. Bns liked how it cuts and wants one like it.

[duckhuntr21]

Do they still make them? I haven't saw them on shelves in a long time.

[bassNspear]

They are giving bns and Laska a hard time. My chisel is high and dry. Bns liked how it cuts and wants one like it.

its the one piece cut same way????

[MJ1657]

I think they are the same. The key is how the cutting edge is stepped. I have never taken mine apart.

[bassNspear]

thanks for the help bud!

[glenn57]

you lookin for a chisel. i made some a few years back if interested. union made bud!!!!!!!!!!!!!!!!!!!

[bassNspear]

noooooooooooooooo

[Archerysniper]

you lookin for a chisel. i made some a few years back if interested. union made bud!!!!!!!!!!!!!!!!!!!

What union shop made them or were they made on the side, if they are side jobs I will have to report you to the hall.

[Gordie]

Archerysniper that would be called a scab chisel

[BOUNCED]

you lookin for a chisel. i made some a few years back if interested. union made bud!!!!!!!!!!!!!!!!!!!

Those Union made chisels hard to move at $400 a piece?

[glenn57]

nope. $40.00 maybe a better deal for friends!!!!!!

[glenn57]

archerysniper, nope no govn job. steel all bought and pd for and built in glenns garage.100% legit, like all us union guys are!!!!!

[bassNspear]

beat they dont work like that jiffy thow

[glenn57]

BET IT MIGHT. all in the operator!!!

[BOUNCED]

Any pics Glenn? Is it heavier than the Mille lacs?

I like mine but was looking for a heavier hitter, I may want one.

[glenn57]

no picks but will try this weekend. i have made 3 different sizes. the one i have left is the middle one. not real heavy. by 3 sizesi mean heavy middle and lite, lite one i use typically for poppin fishhouses loose and reopening the hole the middle one for chopping holes blocks in half etc. muti-porpuse the heavy one and i only made a few and only one left is mine i se for of course heavy duty choppin and first ice testin. my issue is i have no place to harden my chisel head and i dont ave the right equipment to do it myself anymore.

oh yea not sure what the millacs is!

[BOUNCED]

oh yea not sure what the millacs is!

Jiffy

[MJ1657]

The stepped blade makes them cut so good.