Jump to content

  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

wheel house bouncing

gulllake

By gulllake
in Ice Fishing

 Share

Recommended Posts

gulllake Rookie

gulllake

Posted
Posted

Well I took my first trip this weekend with my fish house that I built. We traveled about 100miles to a campground. My house is 12' long. It seemed to pull really nice behind my trailblazer until I hit a concrete road. Wow did it bounce! I felt every seam. I think I will pull with my tahoe which will help, but Im scratching my head to find out if this is common with other fisherman? Is it just the road or could it be springs, or weight dist? It weighed in at 2400lbs. House is designed for 3500lbs. I eneded up slowing down to 40mph. I think the hoppping could blow a tire. I'm looking for suggestions on things to check.

Link to comment
Share on other sites
Ed Carlson Grand Master

Ed Carlson

Posted
Posted

The first thing I would try is some extra tongue weight.

Tongue weight is a very likely factor, but sliding the axle back may not be a option due to hole configuration and set frame position realities.

Spring style and load rating is another, a spring set that is too light or even rigid will build up bounce and it gets worse by the hop.

If your rigid, then you may need to tinker with tire pressure and weight dispersal to get it to stop the hop.

The style torsion axles are popular on ice shacks as they tend to solve this on there own.

Link to comment
Share on other sites
shizzy Experienced

shizzy

Posted
Posted

ditto on the tire pressure thing. you might want to try it again with a few pounds of pressure taken out. I run a bout 5PSI under max on my little boat since its so light and likes to hop around a bit. NOT more then a few though, as you dont want to run down the interstate with underinflated tires.

were you pulling the shack full of gear or empty?

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Your Responses - Share & Have Fun :)

    • SledNeck
      Random Daily Pics

      By SledNeck · Posted

      Sorry man 
    • rundrave
      Random Daily Pics

      By rundrave · Posted

      Sorry to hear that Duff. Will give my GSP's an extra scratch behind the ear for you guys today
    • Wanderer
      Random Daily Pics

      By Wanderer · Posted

      Aw, man, sorry to hear that.  Shed some tears and remember her well.  They all take a piece of our hearts with them; some more than others.
    • Mike89
      Random Daily Pics

      By Mike89 · Posted

      yes sorry for your loss..  our dogs are always special...
    • smurfy
      Random Daily Pics

      By smurfy · Posted

      Truly sorry to hear that duffman! I know that feeling.  Keep the good memories  
    • Duffman
      Random Daily Pics

      By Duffman · Posted

      Chamois passed away this weekend a couple days short of her 13th bday. What a great dog to hang out with here at home and on distant adventures. Gonna miss ya big time my little big girl.
    • Crow Hunter
      New boat question

      By Crow Hunter · Posted

      Sounds pretty sweet, alright. I will check them out, thanks.
    • Wanderer
      New boat question

      By Wanderer · Posted

      If you really want to treat your wife (and yourself) with a remote operated trolling motor, the Minn Kota Ulterra is about easy as it gets.  Auto stow and deploy is pretty awesome.  You just have to turn the motor on when you go out and that the last time you have to touch it.   24V 80lb.  60 inch shaft is probably the right length for your boat.  They ain’t cheap - about $3k - but neither one of you would have to leave your seat to use it all day.
    • Crow Hunter
      New boat question

      By Crow Hunter · Posted

      Wanderer, thanks for your reply. I do intend for it to be 24 volt, with a thrust of 70-80. Spot lock is a must (my wife is looking forward to not being the anchor person any more).  With my old boat we did quite a lot of pulling shad raps and hot n tots, using the trolling motor. Unlikely that we will fish in whitecaps, did plenty of that when I was younger. I also need a wireless remote, not going back to a foot pedal. We do a fair amount of bobber fishing. I don't think I will bother with a depth finder on the trolling motor. I am leaning toward moving my Garmin depth finder from my old boat to the new one, just because I am so used to it and it works well for me. I am 70 years old and kinda set in my ways...
    • Wanderer
      New boat question

      By Wanderer · Posted

      Dang, new content and now answers.   First, congrats on the new boat!   My recommendation is to get the most thrust you can in 24V, assuming a boat that size isn’t running 36V.  80 might be tops?  I’m partial to MinnKota.     How do you plan to use the trolling motor is an important question too.     All weather or just nice weather?   Casting a lot or bait dragging?   Bobber or panfish fishing?   Spot lock?  Networked with depth finders?  What brand of depth finders?

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept