Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

Recommended Posts

Clean in soap/water first. Then remove mineral deposits with muriatic acid cut about 3 to 1 water to acid (let soak as needed). Next soak in mineral oil for an hour or so. Wipe with clean towel.

Polishing the smaller agates is a lot of fun.

Link to comment
Share on other sites

Most of the local hardware stores carry it. The big-box stores have stopped because of liablity issues. It's nasty stuff. Glasses and gloves are a good idea. Soap and water work fine most of the time. I usually only have to soak the agates I find lakes and rivers

Link to comment
Share on other sites

Yes, Be very careful with it. Most agates don't need it but sometimes the cement like deposits on the surface is "baked" on. I suppose some milder acids would work too...maybe some drain cleaner or lime away.

Link to comment
Share on other sites

My son and I were grouse hunting inland near the North Shore of Superior. The grouse were particularly uncooperative this day. When we came to a creek filled with gravel you know what we had to do? Yep shimmy down to it and start looking. The first thing I saw was a fresh wolf track in the mud. Needless to say I held onto my shotgun in one hand while pickin agates with my other. My son had to lay his down because this was our best area we have ever picked, bar none. Here we are wading up river trying not to slip and get wet looking for grouse, wolves, and agates. What a great way to end the day. Nothing huge but we did find a couple bigger than walnuts and the potential for bigger ones was definitely there if we were prepared with our tall rubber boots and picking scoops.

Hey Captain heres a newer book for you to check out:

Agates: Inside Out

by Karen A. Brzys

Also there is a good rock shop in Prescott WI, Two Harbors, and Beaver Bay on the north shore. And most of the gravel roads in the metro have agates strewn about them.

Good Luck,

Ferny.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Your Responses - Share & Have Fun :)

    • As a recovering machinist, I can appreciate that.  If the spec is 0.001 - 0.0015, then clearly the correct measurement is 0.00125, duh…
    • I just figured that it is easy enough to just get a 3 bank so when the boat is not in use I can keep all 3 batteries charged. I have not bough a charger yet, maybe I will give it some more thought. Edit: After thinking this over, with the size, weight, and heat output of the charger (as well as the cost) I think it makes sense to just buy a 2 bank charger, I have a smaller charger i can use on the starting battery when the boat is sitting at home. Forgive me, for i am a retired engineer and I have to obsess over everything...
    • Congrats on the motor!  I think you’ll like it.   I can’t say much on the charger location but I’ve seen them under the lid in back compartments and under center rod lockers.  160 degrees is more than I expected to hear.   Curious why you’re opting for a 3 bank charger with a 24V trolling motor.  Unless you don’t feel you be running you big motor enough to keep that battery up as well?
    • I did buy an Minnkota Ulterra, thanks for the recommendations. I had a bunch of Cabela"s bucks saved up, which helped. Now i need to get an onboard battery charger. Where do you guys mount these things in your boat? The manufacturer I am looking at {Noco genius) says tht their 3-bank charger will run at 160 degrees, seems like a lot of heat in an enclosed compartment? Thanks for any input on this.
    • You're very lucky a troop of Sea Monkey's didn't carry you away.   
    • Wasn't terrible at a state park beach. Antelope island maybe.  I wouldn't recommend it as a beach destination tho.  Figured I was there, I'm getting in it.
    • The water looked and smelled disgusting with hundreds of thousands of birds sh*tting in there.  About as gross as the Salton Sea. When I duck hunted there I didn't even want to touch the water.
    • It's kinda gross with the algae in the summer but I got in it anyway.  Wanted to see the increased bouyancy at work.  You can kinda tuck yourself into a ball and you'll just float with your head above water.  When dry off you look diamond encrusted with the salt.
    • We went to the flats too. I dipped a tire on the rental car onto it just to say I’ve been there,but it was still pretty soft from winter melt. After seeing some moron in a BMW suv get dragged out of the muck I had no intention of repeating his stupidity. 
    • I've been out on the flats. It's like being on a different planet 
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.