Jump to content
  • GUESTS

    If you want access to members only forums on HSO, you will gain access only when you Sign-in or Sign-Up .

    This box will disappear once you are signed in as a member. ?

  • 0

vapor barrier in a fish houses a good idea


wheelerboy920

Question

11 answers to this question

Recommended Posts

  • 0

Wheeler, what kind of insulation do you use ? I personally wouldnt use the plastic because that will cause moisture problems. You might want to use 2inch foam and foam spray instead . The foam works as a thermo barrier, think of it as a to-go coffee cup. You put ice cold water in it, it doesnt sweat. Same thing with boilin hot water, cold on the outside nice and warm on the inside, and no moisture build up. The high dollar would be spent in using foam, probably 20+ bucks per sheet, but money well spent. Hope it helps you out..

Link to comment
Share on other sites

  • 0

I don't think you need a vapor barrier. The vapor will come from your breath on the inside and from your heater if it is not vented. If anything you want the vapor to be able to escape. I have a vented heater in a king crow and I do get a little condensation on the walls particularly by the corners. It usually stays at about 50-60% RH inside but with the walls being a little cooler than the rest of the inside it condensates some on the walls.

Link to comment
Share on other sites

  • 0

A vapor barrier is probably a waste of money cause you really aren't going to be using it enough for that to be an issue. More likely than not you're going to have too much moisture inside from ice melting, people, heater or other propane stuff etc.

Link to comment
Share on other sites

Join the conversation

You can post now ↓↓↓ or ask your question and then register. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.